Super tiny Orings for oil pump

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
dans6887
On the street
Posts: 10
Joined: Tue Apr 12, 2016 9:00 pm
Country: United states
Suzuki 2-Strokes: 1972 suzuki gt380

Super tiny Orings for oil pump

Post by dans6887 »

Does anyone know where i can get the small o-rings / gaskets for the oil pump? There are 6 of them and they are only about 2 mm in diameter. I can't put the motor back together until I get them. Any help would be appreciated. I did find a listing on ebay but I wanted to make sure its the right one and if if anyone knew a better place to get them.
http://www.ebay.com/itm/Suzuki-09280-03 ... Yj&vxp=mtr
dans6887
On the street
Posts: 10
Joined: Tue Apr 12, 2016 9:00 pm
Country: United states
Suzuki 2-Strokes: 1972 suzuki gt380

Re: Super tiny Orings for oil pump

Post by dans6887 »

I found this listing on partzilla as well. I think its the same thing that I need I just want to be sure before ordering
http://www.partzilla.com/parts/detail/s ... 03002.html
User avatar
Jimroid
To the on ramp
Posts: 309
Joined: Sun Feb 21, 2016 8:32 pm
Country: USA
Suzuki 2-Strokes: GT500 T500 GT750
Location: Pisgah Forest, N.C. USA

Re: Super tiny Orings for oil pump

Post by Jimroid »

I would think you could get metric o-rings at your local industrial / bearing supply house,or GOOD automotive parts supplier. Or McMaster-Carr.
pearljam724
AMA Superbike
Posts: 1681
Joined: Tue Jul 24, 2012 11:45 pm
Country: U.S.
Suzuki 2-Strokes: 75- GT 550 / 76- GT 750
Location: SW PA

Re: Super tiny Orings for oil pump

Post by pearljam724 »

Harbor frieght sells a metric o-ring assortment kit for 10 bucks. One of the sizes in that kit works perfect. With many o- rings to spare. There's approximately 20 o-rings for each size in the kit. Including the size you need. Just make sure you buy the metric kit and not accidentally the SAE one.
Image Image
User avatar
jabcb
Moto GP
Posts: 4311
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: Super tiny Orings for oil pump

Post by jabcb »

Partzilla lists them as still available from Suzuki. Part # 09280-03002 is correct.
http://www.partzilla.com/parts/search/S ... parts.html

If you aren’t sure, you can order via your local Suzuki dealer. The local dealer likely will charge a bit more but you may get the parts faster.
You can check you local dealer's website, they probably have an online parts ordering system.



Presumably you are also replacing the sealing washing on the oil line banjo bolts.
Suzuki doesn’t sell those plastic washers anymore and has substituted aluminum washers.
Stat-O-Seal washers washers work a lot better.
They’re available from McMaster-Carr (size M6):
http://www.mcmaster.com/#stat-o-seal-washers/=jdia08
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Drewski
On the main road
Posts: 113
Joined: Sun Aug 16, 2015 8:18 am
Country: UK
Suzuki 2-Strokes: GT750M TS125 TS100 GT750B
Location: East Angular, UK

Re: Super tiny Orings for oil pump

Post by Drewski »

My pattern gasket set came with 'em.
dans6887
On the street
Posts: 10
Joined: Tue Apr 12, 2016 9:00 pm
Country: United states
Suzuki 2-Strokes: 1972 suzuki gt380

Re: Super tiny Orings for oil pump

Post by dans6887 »

Thanks to everybody. I was able to get orings I need from the local O'Reilly auto parts store. I took them and they fit perfectly. Thanks again for all the suggestions. :mrgreen:
Post Reply