Hi, I have taken my speedo apart for a full restauration and a custom face. Now there is a thin rubber gasket left which I cant remember where to put it on. It is the thin gasket in the middle of the picture:
Does it go on the black outer cup of the speedo unit:
or the blue/green inner cup:
or on the main baseplate of the speedo:
GT750 speedo assembly
Moderators: oldjapanesebikes, H2RICK, Suzsmokeyallan
-
- Around the block
- Posts: 95
- Joined: Thu Dec 05, 2013 12:32 pm
- Country: Austria
- Suzuki 2-Strokes: GT750
- tz375
- Moto GP
- Posts: 6206
- Joined: Mon Nov 03, 2008 10:47 am
- Location: Illinois
Re: GT750 speedo assembly
On a GT750 it goes around the inner cup and seals the outer black part and the rear mount. On a sexy Bimota, things might be different....
Nice new face. What does the rest of the bike look like?
Nice new face. What does the rest of the bike look like?
-
- Around the block
- Posts: 95
- Joined: Thu Dec 05, 2013 12:32 pm
- Country: Austria
- Suzuki 2-Strokes: GT750
Re: GT750 speedo assembly
Thanks for that info, thats exactly what I wanted to know. Now I will starting fiddling putting the speedo housing together again.
The BIMOTA HBGT1 replica project just started - I have a rolling chassis, some bodyparts and a TR750 ported engine. JEMCO´s are on the way.
Here is my thread in the "Customs" section:
http://www.suzuki2strokes.com/forum/vie ... 21&t=11842
The BIMOTA HBGT1 replica project just started - I have a rolling chassis, some bodyparts and a TR750 ported engine. JEMCO´s are on the way.
Here is my thread in the "Customs" section:
http://www.suzuki2strokes.com/forum/vie ... 21&t=11842