I ordered a natural gas grill. I have a gas supply about 15 ft. away from the grills location. The grill is not here yet.
Is it safe to use PVC for the line? NG is low pressure - about 7 - 9 psi.
OT Natural gas grill
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- Coyote
- Moto GP
- Posts: 3404
- Joined: Tue Oct 21, 2008 2:41 pm
- Country: USA
- Suzuki 2-Strokes: GT550x2, GT750, GS1000
- Location: Tulsa, Oklahoma
OT Natural gas grill
I was born with nothing and still have most of it left.
.
1978 GS1000C
1976 GT550 ongoing money pit.
.
1978 GS1000C
1976 GT550 ongoing money pit.
- Suzsmokeyallan
- Moto GP
- Posts: 4326
- Joined: Fri Oct 24, 2008 9:11 am
- Location: Mostly Barbados, sometimes Florida and western Canada
- Contact:
There is some new flexible PVC lines available for water and other fluids/gases. The one for water is blue and i believe the NG is either yellow or red in sheath colour, so buy accordingly.
Two strokes, its just that simple.
69 Suz U70
69 Suz T500
72 Suz GT750 cafe
74 Suz TS250
74 Suz GTXVR project
75 Suz RE5
75 Suz GT750
76 Suz TS400
76 Suz GT750
81 Suz GSX1100
86 Suz RG500x2
88 Hon CR500
93 Hon CBR900RR
98 Suz GSF1200x3
15 Kaw Ninja H2
69 Suz U70
69 Suz T500
72 Suz GT750 cafe
74 Suz TS250
74 Suz GTXVR project
75 Suz RE5
75 Suz GT750
76 Suz TS400
76 Suz GT750
81 Suz GSX1100
86 Suz RG500x2
88 Hon CR500
93 Hon CBR900RR
98 Suz GSF1200x3
15 Kaw Ninja H2
- Coyote
- Moto GP
- Posts: 3404
- Joined: Tue Oct 21, 2008 2:41 pm
- Country: USA
- Suzuki 2-Strokes: GT550x2, GT750, GS1000
- Location: Tulsa, Oklahoma
-
- To the on ramp
- Posts: 468
- Joined: Tue Oct 14, 2008 7:10 pm
- Location: St. Paul, MN
These guys have some nice flexible hose for natural gas.
http://www.mcmaster.com/#natural-gas-hose/=819zrk
They list 5 psi as max working pressure, so if you regulate it accordingly and check your burner specs you'll probably be okay.
Here's some flexible yellow coated stainless:
http://www.grainger.com/Grainger/items/7A0R5?Pid=search
I think this is the yellow pipe that Allan mentioned, but I think that its meant to be buried:
http://www.charterplastics.com/natural_gas.html
I think that pipe would probably be the cheapest.
http://www.mcmaster.com/#natural-gas-hose/=819zrk
They list 5 psi as max working pressure, so if you regulate it accordingly and check your burner specs you'll probably be okay.
Here's some flexible yellow coated stainless:
http://www.grainger.com/Grainger/items/7A0R5?Pid=search
I think this is the yellow pipe that Allan mentioned, but I think that its meant to be buried:
http://www.charterplastics.com/natural_gas.html
I think that pipe would probably be the cheapest.
1954 Harley ST165 basket in the attic
1972 Suzuki GT750 project in the works
1981 Honda CB750-1000 driver
1982 Honda GL500 easy project
1972 Suzuki GT750 project in the works
1981 Honda CB750-1000 driver
1982 Honda GL500 easy project
- Coyote
- Moto GP
- Posts: 3404
- Joined: Tue Oct 21, 2008 2:41 pm
- Country: USA
- Suzuki 2-Strokes: GT550x2, GT750, GS1000
- Location: Tulsa, Oklahoma
Went to a local supply house (Empire Plumbing) yesterday and they have all the NG lines I need in yellow flexible PVC with stainless NPT ends already installed. They came in 1, 2,, 3, 4 and 6 foot lengths. The 6 footer coupled with the 10 footer attached to the grill should make the required run. I didn't buy anything because the grill is still not here and I don't know what type of connector it has.
They were labeled 'Natural Gas appliance supply lines' 'Suitable for indoor or outdoor use'.
They were labeled 'Natural Gas appliance supply lines' 'Suitable for indoor or outdoor use'.
I was born with nothing and still have most of it left.
.
1978 GS1000C
1976 GT550 ongoing money pit.
.
1978 GS1000C
1976 GT550 ongoing money pit.
-
- Road race school
- Posts: 785
- Joined: Tue Oct 14, 2008 11:00 pm
- Location: Wharton, NJ USA