Fancy a V12 Honda CBX???

Post by **Suzsmokeyallan** » Sat May 01, 2010 7:42 am

A design study in itself.
http://thekneeslider.com/archives/2009/ ... eorgeades/

And heres it running in an initial test.
http://www.youtube.com/watch?v=OEe6c3KIUB4

Post by **oldjapanesebikes** » Sat May 01, 2010 9:05 am

Amazing

Jughead · Post by **Jughead** » Sat May 01, 2010 9:58 am

Imagine workin on the carbs on that one.

Arne · Post by **Arne** » Sun May 02, 2010 6:37 am

That's quite a feat.

If that were me, cylinder #9 wouldn't fire on idle for no apparent reason ; )

captainbellybuster · Post by **captainbellybuster** » Sun May 02, 2010 6:50 pm

Hi all, a guy turned up at the VJMC Rally a couple of years ago on this....

He's engineered 2 RD350LC engines together. Sounded pretty awesome!!

two-stroke-brit · Post by **two-stroke-brit** » Sun May 02, 2010 7:14 pm

you had me at V12.

But doing the valves would be a never ending task.

Craig380 · Post by **Craig380** » Mon May 03, 2010 4:48 am

It's interesting how he's done the crank, with two conrods side by side on the same big end bearing.

When Allan Millyard made his V12 Kawa from two Z1300s, he had a set of special "Y" rods made that had a secondary big end above the crank.

I bet the cam timing took a bit of head-scratching to work out

Fancy a V12 Honda CBX???

Fancy a V12 Honda CBX???

v12