Archived Posts

Post by **Admin** » Mon Oct 30, 2006 7:13 pm

I have used lumirod, and it's totally cool! When at temp, it's like solder. I use a stainless dental tool to scrape the part with and it sticks like crazy. The color is a bit different, but not a big deal.

Post by **Admin** » Mon Oct 30, 2006 7:37 pm

Nice work Lane! I remember seeing this at The Gap in the summer and wondering how far you would get with it before it drove you nuts.......keep us up to date on how it progresses. If you get tired of it one day, I'll take it off your hands.

How come I never find deals like this? T'ain't fair!

Post by **Admin** » Mon Oct 30, 2006 7:53 pm

Thanks for the input. I've got some on order, along with a set of rings. My seals came in today. So, let the fun begin

Post by **Admin** » Mon Oct 30, 2006 8:13 pm

Heres a link to the same aluminum welding rod I bought...same seller...same product...

http://cgi.ebay.com/USA-WELDING-ROD-AND ... dZViewItem

FYI

Post by **Admin** » Mon Oct 30, 2006 9:28 pm

maybe what was needed was a few full-course cautions(ala Nazcar

) to tighten up the pack and give Rossi a chance.

Sorry,had to say that,I don't really know squat about GP racin'

Post by **Admin** » Mon Oct 30, 2006 10:39 pm

Could I park this Chow Wagon at your Place for a While.

That is if I get it.I'm needing a new Truck to run Shine in.This would be the Perfect cover.You Know Kinda like Cheech and Chong's Ice Cream Truck.

http://cgi.ebay.com/ebaymotors/1998-Dak ... dZViewItem

Post by **Admin** » Mon Oct 30, 2006 10:42 pm

Moo wrote: And so what if Nicky didn't have much to say? He is not a speaker, he is a racer. I guess he should of ridden around the track with a blow up doll or chicken on the back of the bike? It's not a popularity contest...............

Point taken....

You are right about that. I guess I'm being a little hard on Nicky. Rossi lacked professionalism at the start as well.

Post by **Admin** » Mon Oct 30, 2006 10:49 pm

GT Tim wrote: That brings back memories of stickers, cards and bad stale chewing gum!!!!

Awe man............. I loved those when I was a kid!

Post by **Admin** » Mon Oct 30, 2006 10:50 pm

rngdng wrote:I go to Auto Zone and look at hoses on the rack. I found one that had sections that were compatible with all three main sections of hose. You can also find a small one that works for the bypass.

Lane

I did the same thing at NAPA.....

Post by **Admin** » Mon Oct 30, 2006 10:56 pm

I'll see what I can do.Haven't Heard anything Yet.

Post by **Admin** » Tue Oct 31, 2006 6:23 am

Hey Allen, it was great to talk to you yesterday! I am looking forward to seeing you on the 10th!!! I'll have a waterbuffalo ready to go for you

We can ride thru Myakka state park & have lunch. I will do my best to round up a couple more 2 strokers for the ride but you know how that goes......most of these guys would rather sit at thier computers all day & BS rather that ride

I'm sure we can at least get Pete P. & Rick H. to ride with us

Ed

Post by **Admin** » Tue Oct 31, 2006 7:15 am

You guys are good. I'd be lost without ya, or at least I'd have more dead bikes in the garage

Sometimes I wonder, "why the heck am I playing with 35 year old bikes." Then I realize I enjoy working on them, and when I ride them I realize it's just plain ol fun.

Post by **Admin** » Tue Oct 31, 2006 7:24 am

Hi Jim,
We should be getting close to the number of shirts you need for an order. I thought I'd get this post back toward the top of the page so people can see it.

Gotta have one of those shirts. As my daughter would say "they're wicked awesome"

Later,
Tony T

Post by **Admin** » Tue Oct 31, 2006 9:54 am

Today and Yesterday was Real Nice.I was Planning on Slapping some more Jets in the 69 but as I was Walking out the Door to go to the Shop the Boss Called.

I wish I hadn't Answered the Phone.

Hey Ed I try to keep it at least 50/50 on the Ride and BS thing.

Hopefully one Bad Snowy Cold Winter Day I'll make it down your Guys way.

Probably be when I'm too old to Ride and After I retire.

Post by **Admin** » Tue Oct 31, 2006 11:41 am

that look ideal for a mobile powerder coating business.. are you really going to get it?

Archived Posts

Hey Jim or Jeff......

Getting close