Peak revving from startup

Need some help? Put your question up here. Many years of experience on the board to help you get up and running.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
Johnny
Still in the Driveway
Posts: 4
Joined: Fri Jan 26, 2024 4:47 pm
Country: Australia
Suzuki 2-Strokes: GT750 1975

Peak revving from startup

Post by Johnny »

Hi all, I have a problem that's doing my head in. I have a 75 GT750 that when it fires up it won't idle but just peak rev, I've cleaned the carbies several times,adjusted the floats, new kits throughout adjusted as per manual and still no cigar 🤬 suggestions greatly appreciated.

Johnny
garncarz
On the street
Posts: 24
Joined: Sat May 04, 2024 4:32 pm
Country: United States
Suzuki 2-Strokes: 1972 T500J

Re: Peak revving from startup

Post by garncarz »

Have you:

1. Tested for air leaks?
2. Set the initial slide height visually (sewing needle method)?
3. Synced the carbs?
4. Confirmed that your throttle cable(s) routed correctly and not binding up (keeping the slides up when they shouldn't)?

I spent a week figuring that last one out. :?
Post Reply