Hi, after T500 clutch outer if anyone has one they are willing to part with. The type with 18 "ears".
Thanks.
Phil
Wanted..T500 clutch outer basket
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
casperdog
- On the street
- Posts: 22
- Joined: Fri Jan 31, 2020 3:18 pm
- Country: United Kingdom
- Suzuki 2-Strokes: T500
-
Steve zodiac
Re: Wanted..T500 clutch outer basket
I don't know if this is of interest but...
Nova engineering sell their own T500 clutch baskets, rivets & damper rubbers.
Regards.
Sean.
Nova engineering sell their own T500 clutch baskets, rivets & damper rubbers.
Regards.
Sean.
-
Zunspec4
- Expert racer
- Posts: 1087
- Joined: Tue Dec 16, 2008 11:37 am
- Country: UK
- Suzuki 2-Strokes: T500R, SV1000S, TS125, Seeley T500
- Location: Trowbridge UK
Re: Wanted..T500 clutch outer basket
Hi Phil,
Here's a photo of the NOVA billet clutch basket as fitted to one of my race engines. It uses T500 (12 finger) friction plates and a combination of Honda/Suzuki DR350 steel plates. It spins on a needle roller bearing vice the std. bronze bearing. You will need the skills of de-riveting and re-riveting the primary gear.
On the other hand I can't think why you couldn't just fit a 12 finger basket as an alternative if you can't source a 18 finger item.
Cheers Geoff
Here's a photo of the NOVA billet clutch basket as fitted to one of my race engines. It uses T500 (12 finger) friction plates and a combination of Honda/Suzuki DR350 steel plates. It spins on a needle roller bearing vice the std. bronze bearing. You will need the skills of de-riveting and re-riveting the primary gear.
On the other hand I can't think why you couldn't just fit a 12 finger basket as an alternative if you can't source a 18 finger item.
Cheers Geoff
