Banshee Coils

[Doss1961]

Hello

I am going to fit a pair of Banshee coils to my 250R Hustler and the coils only have one spade connector on each coil but I have four wires 2 Orange 1 Black & 1 White could any members advise on the correct wiring procedure.

Thanks in Advance

Paul

[dollydog]

think you'll find the banshee runs cdi ignition and there's no 12v feed to them [orange wires are the live feeds, black goes to one coil, white wire goes to the other]. the kill switch on a cdi system earths the coils to kill the engine, obviously the normal ignition kill switch breaks the 12v live feed to cut the motor. by the time you've figured out the wiring [swapping live for earth etc] you could have finished the bike and done 1000 miles on it don't bother is my advice more trouble than it's worth.
cheers, dd.