Excellent news that a member here helped you sort this!!
You should post a pic of that washer to include dimensions of outer and inner diameter. As mentioned, it may go in the clutch assembly. Might be best to ID it before running the bike.
kickstarter conundrum
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- Evans Ward
- To the on ramp
- Posts: 326
- Joined: Mon Oct 24, 2016 12:35 pm
- Country: USA
- Suzuki 2-Strokes: 76 GT750, 72 H2 750, 84 RZ350
- Location: Macon, GA. USA
Re: kickstarter conundrum
1976 Suzuki GT750 (Maui Blue), 1972 Kawasaki H2 750 Mach IV (Candytone Blue), 1984 Yamaha RZ350 (KRR- Yellow/ Black).
-
- Expert racer
- Posts: 1120
- Joined: Wed Jul 10, 2013 12:04 pm
- Country: England, UK
- Suzuki 2-Strokes: FZ50, GP100, RG125 Gamma, GT380, Bandit 1200S
Re: kickstarter conundrum
Glad you found the problem. Could the washer be from other end of the kickstart shaft? (part 17 in the exploded diagram)Ramjam wrote: UPDATE
Sportson was bang on with his hunch. In fact i HAD placed incorrectly a washer on the outside of the cog. Soon as i whiped it off, kiskstarter works well. Problem now is where did it come from ??? Oh bugger.
I can sympathise with your "Oh bugger!" moment. I made a similar error on my bike with the stepped washer on the clutch shaft. Didn't notice I had omitted it until after I had bolted and sealed the two crankcase halves together. I think I said more than "Oh bugger" at the time.
-
- To the on ramp
- Posts: 254
- Joined: Tue Apr 30, 2013 9:28 am
- Country: Lebanon
- Suzuki 2-Strokes: gsx 750R, GPZ 750, GT380
- Location: Lebanon
Re: kickstarter conundrum
If someone could post a picture of the entire clutch assembly, i would be very grateful. cheersRamjam wrote:Ramjam wrote:Exactly. But maybe my mind's playing tricks on me. For sure, that washer was there before at some point. But just last weekend i had the case off and i didn't recall seeing it. Will have it off soon and settle my curiosity. but yes, if it's there, where did it come from? Behind the clutch assembly? Or one of the other cogs?sportston wrote:Then can we assume from your line of questioning that you have inserted an unnecessary washer between the kickstart cog and the clutch cover?
If so, ditch the spare washer and you should have a kickstart that works. It would raise another question though. Where did the spare washer come from? Was it supposed to go somewhere else?
Yikes
UPDATE
Sportson was bang on with his hunch. In fact i HAD placed incorrectly a washer on the outside of the cog. Soon as i whiped it off, kiskstarter works well. Problem now is where did it come from ??? Oh bugger.
-
- Expert racer
- Posts: 1120
- Joined: Wed Jul 10, 2013 12:04 pm
- Country: England, UK
- Suzuki 2-Strokes: FZ50, GP100, RG125 Gamma, GT380, Bandit 1200S
Re: kickstarter conundrum
Like this?
-
- To the on ramp
- Posts: 254
- Joined: Tue Apr 30, 2013 9:28 am
- Country: Lebanon
- Suzuki 2-Strokes: gsx 750R, GPZ 750, GT380
- Location: Lebanon
Re: kickstarter conundrum
Brilliant. thanks so much. Im pretty sure, looking at this pic, that i have only replaced one of the two washers, which i can now see in the diagam. Cheers for that.sportston wrote:Like this?
-
- Expert racer
- Posts: 1120
- Joined: Wed Jul 10, 2013 12:04 pm
- Country: England, UK
- Suzuki 2-Strokes: FZ50, GP100, RG125 Gamma, GT380, Bandit 1200S
Re: kickstarter conundrum
You're welcome. You can usually get parts assembly pics like this from Partzilla or in this case Robinson's Foundry. I have found them to be invaluable in my own rebuilds
- dorT500
- To the on ramp
- Posts: 253
- Joined: Mon Jun 12, 2017 12:01 pm
- Country: USA
- Suzuki 2-Strokes: '75 T500M since '93 Ridden it over 100,000 mi
- Location: Galveston County, Tx.
Re: kickstarter conundrum
Yep and for the 'big picture'.....you gotta love that exploded engine artwork......sportston wrote:You're welcome. You can usually get parts assembly pics like this from Partzilla or in this case Robinson's Foundry. I have found them to be invaluable in my own rebuilds
and for those peeling an unfamiliar engine apart, a service manual and a camera can be their best friends.
_____________
______________________
_______________________________
GONE.......WITH A PUFF OF SMOKE AND A BLUR OF SPOKE
______________________
_______________________________
GONE.......WITH A PUFF OF SMOKE AND A BLUR OF SPOKE