Hi, has anyone used the Delkevic stainless steel exhaust down pipes for the T500? Do they fit ok? Is the stainless a good match looks wise with the chrome? Any other comments on them?
Thanks.
Delkevic downpipes for T500
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
rider
- On the street
- Posts: 36
- Joined: Wed Jul 22, 2015 1:33 am
- Country: Australia
- Suzuki 2-Strokes: AP50, GT250A, T500M(2), T250, G
-
rngdng
- AMA Superbike
- Posts: 1769
- Joined: Tue Oct 14, 2008 6:47 pm
- Location: Blythewood, SC, USA
Re: Delkevic downpipes for T500
Everything I have heard of Delvevic parts is that they are right... I have no personal experience.
If you stroke it more than twice; you're playing with it.
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
-
argo1974
- To the on ramp
- Posts: 206
- Joined: Fri Nov 07, 2008 3:01 am
- Location: Tallinn, ESTONIA
Re: Delkevic downpipes for T500
I ordered them few years ago but returned again. The downpipes were out of round and wavy. According to Delkevic they were not able bending stainless steel any better.
1x T500 Cobra (1968)
4x T500K (1973)
4x T500K (1973)
-
rider
- On the street
- Posts: 36
- Joined: Wed Jul 22, 2015 1:33 am
- Country: Australia
- Suzuki 2-Strokes: AP50, GT250A, T500M(2), T250, G
Re: Delkevic downpipes for T500
I ordered them (before I read argo1974’s post!). I’ll let you know how they are.
