Does anybody have the T500 part no. for..

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
tricky1962
To the on ramp
Posts: 237
Joined: Wed Jul 18, 2012 10:46 am
Country: United Kingdom
Suzuki 2-Strokes: T500J
Location: Eastbourne

Does anybody have the T500 part no. for..

Post by tricky1962 »

The grommet that protects the blue neutral switch wire between the sprocket cover and the alternator cover?

Sorry for the inane question, but I can't see it anywhere and as I'm shopping for parts would like to include it.

It must be a simple half circle grommet but..
User avatar
Jimroid
To the on ramp
Posts: 309
Joined: Sun Feb 21, 2016 8:32 pm
Country: USA
Suzuki 2-Strokes: GT500 T500 GT750
Location: Pisgah Forest, N.C. USA

Re: Does anybody have the T500 part no. for..

Post by Jimroid »

31485-15020
tricky1962
To the on ramp
Posts: 237
Joined: Wed Jul 18, 2012 10:46 am
Country: United Kingdom
Suzuki 2-Strokes: T500J
Location: Eastbourne

Re: Does anybody have the T500 part no. for..

Post by tricky1962 »

Cheers, but correct me if I'm wrong. I think that is the grommet at 12 'o' clock for the wires from the generator.

I need the grommet at 3 'o' clock which solely feeds the blue wire from the neutral switch
User avatar
Jimroid
To the on ramp
Posts: 309
Joined: Sun Feb 21, 2016 8:32 pm
Country: USA
Suzuki 2-Strokes: GT500 T500 GT750
Location: Pisgah Forest, N.C. USA

Re: Does anybody have the T500 part no. for..

Post by Jimroid »

I'd have to pop the cover off to look,so not sure at this point.
tricky1962
To the on ramp
Posts: 237
Joined: Wed Jul 18, 2012 10:46 am
Country: United Kingdom
Suzuki 2-Strokes: T500J
Location: Eastbourne

Re: Does anybody have the T500 part no. for..

Post by tricky1962 »

The notch in the casing is just about visible here

http://www.ozebook.com/compendium/T500parts/image7.htm" onclick="window.open(this.href);return false;

but I am now thinking it is too small for a grommet. Maybe the insulation on the wire should be thicker at that point to protect the conductor?
Post Reply