Has anyone installed emulators in their Buffalo forks? If so, I'd like some details and opinions.
Thanks,
Willie
Emulators in GT750 forks. Is it feasible?
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
Willie
- Around the block
- Posts: 73
- Joined: Mon Sep 28, 2009 8:06 am
- Country: USA
- Suzuki 2-Strokes: GT750, GS1100E, GS1100G
- Location: Kingsport, TN
Emulators in GT750 forks. Is it feasible?
I've been everywhere from Bangor all the way to mighty Maine!
-
tz375
- Moto GP
- Posts: 6210
- Joined: Mon Nov 03, 2008 10:47 am
- Location: Illinois
Re: Emulators in GT750 forks. Is it feasible?
It is possible and in fact it's quite easy as long as we are talking 74 on forks with damper rods.
Follow the instructions but you must get a spacer to fit on top of the damper rods (same spacer as an RD400 IIRC). If not teh forks don't pass oil. They are stiff as rocks.
http://pinkpossum.com/GT750/phattrakka2/p3forked.htm" onclick="window.open(this.href);return false; shows how not to do it. They need a spacer between the emulator and damper rod. I can check the part numbers if you need.
Follow the instructions but you must get a spacer to fit on top of the damper rods (same spacer as an RD400 IIRC). If not teh forks don't pass oil. They are stiff as rocks.
http://pinkpossum.com/GT750/phattrakka2/p3forked.htm" onclick="window.open(this.href);return false; shows how not to do it. They need a spacer between the emulator and damper rod. I can check the part numbers if you need.
