CRAP water in gearbox gt750j

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
kiwi
On the street
Posts: 32
Joined: Mon Sep 23, 2013 12:04 am
Country: New Zealand
Suzuki 2-Strokes: gt750j, m109r, zzr1200, t350, ts250, cb500, g

CRAP water in gearbox gt750j

Post by kiwi »

hi guys,
just drained gearbox and oil looks a bit milky looking,i dont seem to be using any water but dont know how much it would take to do this,how would this get in there ,and would i be doing any real damage if i changed oil ,often as dont really want to rebuild engine yet,
dennis
re5rotary
On the street
Posts: 31
Joined: Tue Nov 04, 2008 3:02 am
Country: New Zealand
Suzuki 2-Strokes: RE5 GT750J RG500 T10

Re: CRAP water in gearbox gt750j

Post by re5rotary »

Hi it doesn't take much water to start to turn the oil milky. I guess it could be getting in through the water pump although the water should come out the 'tell tail' rather than go in the gearbox. The other worse option on a J is the waterway that runs between the cases can leak. There was an oring in this area on later models presumably as this was a weakness on the J. The motor has to come apart to fix this Im afraid regards Terry
Vintageman
Expert racer
Posts: 1485
Joined: Tue May 18, 2010 5:38 pm
Country: USA
Suzuki 2-Strokes: Suz, Yam, Honda, Kaw.
Location: New Hampshire

Re: CRAP water in gearbox gt750j

Post by Vintageman »

Radiator stop leak might be worth a try?
Current registered, inspected, and running well 2 stroke motorcycles
74 GT250 (T350 upgrade),
76 GT250 (T350 upgrade),
71 T350,
70 T350,
74 GT380,
75 T500,
73 GT550,
75 GT750,
72 Yamaha DS7 (R5 upgrade),
77 Yamaha RD400 (Daytona Cyls),
73 Kawasaki H1 500
pull the wire
On the main road
Posts: 105
Joined: Mon Oct 21, 2013 10:04 pm
Country: united states
Suzuki 2-Strokes: 73GT750 75GT750 84RZ350 89 FXRS-CONV
Location: Phoenix, AZ

Re: CRAP water in gearbox gt750j

Post by pull the wire »

Under the oil pump cover there is a vent for the transmission next to the oil pump. Wet weather riding or too much water during wash time could allow water get in there. I had a GT750 long ago that snapped one of the top engine case 6mm fasteners and water got in the trans. I think it was bolt #25 under the starter.

I hope this helps
You gotta pull the wire to go fast
User avatar
oldjapanesebikes
Moto GP
Posts: 3229
Joined: Sat Feb 07, 2009 12:43 am
Country: Canada
Suzuki 2-Strokes: GT750(Jx3,L,M,A,B),T500
Location: Ontario
Contact:

Re: CRAP water in gearbox gt750j

Post by oldjapanesebikes »

Additional to the other earlier comment - J's and some early K's are famous for this type of failure due to a design flaw. The water bypass was re-designed with the mating surfaces made wider in the upper and lower crankcase castings and the addition of an o-ring at around engine 36198. 8)
Ian

If at first you don't succeed, just get a bigger hammer !
Post Reply