oil pump gasket leaking now!!!
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- To the on ramp
- Posts: 280
- Joined: Fri Oct 19, 2012 9:57 am
- Country: U.S.
- Suzuki 2-Strokes: 1974 gt750, 1963 superhawk
oil pump gasket leaking now!!!
Well I had rebuilt the oil pump a while back, I had tested it on a test jig and everything worked perfect, no leaks. I rode the bike today and I opened it a few times, full throttle, when I got back I checked the oil pump because it looked like It was a little wet around that drain hole, when I looked at the pump it was wet in 2 places, oil was coming from where the gasket is, between the top cover and the body! this just happened, it sucks, so does anybody have the link to gtreiner? I need to get a new gasket and I cant seem to find the site, thanks..
-
- Road race school
- Posts: 841
- Joined: Tue Feb 19, 2013 2:45 am
- Country: Australia
- Suzuki 2-Strokes: Suzuki GT750A 1976
- Location: Sydney New South Wales
Re: oil pump gasket leaking now!!!
GT750Battleship.
-
- To the on ramp
- Posts: 280
- Joined: Fri Oct 19, 2012 9:57 am
- Country: U.S.
- Suzuki 2-Strokes: 1974 gt750, 1963 superhawk
Re: oil pump gasket leaking now!!!
ok thanks!!!!! I just looked up one of my old posts and I found it
sorry , but thanks

-
- Road race school
- Posts: 841
- Joined: Tue Feb 19, 2013 2:45 am
- Country: Australia
- Suzuki 2-Strokes: Suzuki GT750A 1976
- Location: Sydney New South Wales
Re: oil pump gasket leaking now!!!

Regards,
GT750Battleship.
GT750Battleship.
-
- To the on ramp
- Posts: 280
- Joined: Fri Oct 19, 2012 9:57 am
- Country: U.S.
- Suzuki 2-Strokes: 1974 gt750, 1963 superhawk
Re: oil pump gasket leaking now!!!
when you got the oil pump gaskets were they the same thickness as the originals? just wondering..
- oldjapanesebikes
- Moto GP
- Posts: 3229
- Joined: Sat Feb 07, 2009 12:43 am
- Country: Canada
- Suzuki 2-Strokes: GT750(Jx3,L,M,A,B),T500
- Location: Ontario
- Contact:
Re: oil pump gasket leaking now!!!
They are slightly thicker than 'paper' thin.Eddie wrote:when you got the oil pump gaskets were they the same thickness as the originals? just wondering..

Ian
If at first you don't succeed, just get a bigger hammer !
If at first you don't succeed, just get a bigger hammer !