new member

aussie gt · Post by **aussie gt** » Fri Sep 14, 2012 10:00 pm

Hi all, I am a new member to this message board and new to any posting or forums.So it will take time to get up to speed with this new way of communicating with the world.I am from central west, New South Wales, Australia. Rode a lot of bikes in my younger days and now restoration of 70,s bikes is my passion plus riding weekends and longer with my sons and mates is great. Have kawasaki zx12r for fun and get the heart going plus two restored cbx1000,s and my new project gt750k (had a new one back in 1973)plus a gt750j to restore later on. So hope to get help and info from this message board CHEERS

Craig380 · Post by **Craig380** » Sat Sep 15, 2012 3:09 am

Hi and welcome -- this is the place for knowledge about Kettles and more

Fritz500 · Post by **Fritz500** » Sat Sep 15, 2012 7:23 am

Welcome!

Before and after photos are appreciated, plus how you got the after...

Cheers

titan performance · Post by **titan performance** » Sat Sep 15, 2012 2:39 pm

Hello from Paul and Tim at Titan Performance.

CBX1000 eh? One of my faves. I had a silver CBXz 1979 model, in the early 80s. I loved that bike. I fitted a Marshall 6-1 Endurance pipe and it sounded like a formula 1 racing car !

aussie gt · Post by **aussie gt** » Sat Sep 15, 2012 5:30 pm

Hi, Fritz500, Paul, Tim,thanks for the welcome. Will get some photos up of before and now,and the cbx,s i love, both twin shocks, one red, one silver and 1/2 a prolink in boxs cheers Neil

aussie gt · Post by **aussie gt** » Sat Sep 15, 2012 7:31 pm

Hi all, Some photos of by project, in my first intro i forget to mention that my wife is into bikes too,has a zf600 which she loves.cheers Neil

SORRY I HAVE TO LEARN HOW TO SMALL A PHOTO, MINE ARE 1280 PIXEL WIDE??? try later

aussie gt · Post by **aussie gt** » Sun Sep 16, 2012 12:47 am

Hoping to up load photo

gt750 as bought 004.JPG

of my new project

aussie gt · Post by **aussie gt** » Sun Sep 16, 2012 1:12 am

A first for me,up loading photos on the web,the new skills we learn cheers

Rhencullen · Post by **Rhencullen** » Sun Sep 16, 2012 7:22 am

Welcome to the site

And well done with the pics

titan performance · Post by **titan performance** » Sun Sep 16, 2012 10:21 am

You certainly have your work cut out with those 2 little beauties !

aussie gt · Post by **aussie gt** » Mon Sep 17, 2012 6:46 am

Hi all, photo as my 73 project comes apart

aussie gt · Post by **aussie gt** » Mon Sep 17, 2012 6:56 am

Hopeful in time i can get the gt750k to a rideable condition like one of my cbx,s

Post by **Suzsmokeyallan** » Mon Sep 17, 2012 8:17 am

Hello Neil and its great to have you here on the forum. Ah the wonderful CBX, one of the last bikes I'm considering to add to my list of things to restore, yours looks great.
The cylinder and carbs on your 73 bike are not correct for that year so check the engine number to see if its only the cylinder or has the whole engine been changed.

aussie gt · Post by **aussie gt** » Mon Sep 17, 2012 11:33 pm

Hi Allan, I believe the bottom end is 73 but not shore, how can you tale, engine no is broken off above engine front sprocket, the "j"' motor i have the engine no is above the clutch cheers

titan performance · Post by **titan performance** » Wed Sep 19, 2012 2:46 pm

I'm no Honda man, but that CBX is an awesome bit of kit.......wish I still had mine !

new member

new member

Re: new member

Re: new member

Re: new member

Re: new member

Re: new member

Re: new member

Re: new member

Re: new member

Re: new member

Re: new member

Re: new member

Re: new member

Re: new member

Re: new member