PE175 pistons in T350

Need some help? Put your question up here. Many years of experience on the board to help you get up and running.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
Whenu
Still in the Driveway
Posts: 7
Joined: Thu Jan 13, 2011 4:21 am
Country: NZ
Suzuki 2-Strokes: T350, 1970 and 1971

PE175 pistons in T350

Post by Whenu »

Hi have heard that pistons from a PE175 can be used in a t350 once the o/size piston is too worn.
Anyone have any info on this mod?
Cheers
Top
Barry S.
To the on ramp
Posts: 444
Joined: Mon Oct 20, 2008 5:31 am
Location: Killen Alabama, USA

Re: PE175 pistons in T350

Post by Barry S. »

I think you can but you have to make a spacer for the bottom of the cylinder to raise it up, the 350 piston is very short on top above the wrist pin and the PE piston is taller. PE pistons are hard to find and pricey as well, I had 2 PE 175's not long ago.
2007 Suzuki V-Strom DL650
Top
User avatar
dinogt
On the main road
Posts: 155
Joined: Mon Feb 01, 2010 12:36 pm
Country: France
Suzuki 2-Strokes: GT 500
Location: st the froggies
Contact:
Contact dinogt

Re: PE175 pistons in T350

Post by dinogt »

There is also 2 holes in front of the exaust...
blue smoke on the horizon
http://www.dinogt.fr
Top
Post Reply

Return to “Repair Forum”