![WTH :wth:](./images/smilies/icon_wtf.gif)
Well a Suz TS/TC/DS 125 piston looks like it would be a nice mild performance mod for a GT380.... std bore is 56mm versus 54mm, It is about 0.020" (1/2mm) taller, 2mm shorter skirt... these are estimates I'll have more exact measurement soon.
I would run an extra base gasket or two and thus only difference is 1.5 -1.0 mm intake I like how the cut outs are wider and a better match for the cylinder liner at transfers
A Yam DS6 piston looks like a nice mod for early GT250 with 16mm pin, Have to raise jug 1mm.
Anyone tried such foolish stuff
![Wink :wink:](./images/smilies/icon_wink.gif)