GT750J soon to find new life
Moderators: oldjapanesebikes, H2RICK, Suzsmokeyallan
- busa1300
- To the on ramp
- Posts: 354
- Joined: Wed Apr 11, 2012 7:17 pm
- Country: USA
- Suzuki 2-Strokes: RGV RGV RGV RGV ......
- Location: Northern Indiana
Re: GT750J soon to find new life
Rear tube was history, so I got a new one just incase I can get this to run....
Cleaned everything up, the rim, spokes, inside of drum, and backing plate/brake shoes. Bearings felt really good, so I'll leave them in untill I get new tires after I know this thing runs like I think it should.
Cleaned everything up, the rim, spokes, inside of drum, and backing plate/brake shoes. Bearings felt really good, so I'll leave them in untill I get new tires after I know this thing runs like I think it should.
You do not have the required permissions to view the files attached to this post.
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
- busa1300
- To the on ramp
- Posts: 354
- Joined: Wed Apr 11, 2012 7:17 pm
- Country: USA
- Suzuki 2-Strokes: RGV RGV RGV RGV ......
- Location: Northern Indiana
Re: GT750J soon to find new life
Can you tell me where to find that fuel tap for that price? I've check a few UK parts outlets...but none near that low price...oldjapanesebikes wrote:busa1300 wrote:any help on directing me to a total rebuild kit for the petcock or carbs would help me keep moving on this diversion from the bikes I should be working on.....
You can still also buy a new petcock complete from Suzuki (44300-31051), but the cost is a bit eye watering in the USA and Canada at $274 in USD - its cheaper in the UK by an amazing $125 USD for North American buyers (no VAT) which should cover the shipping and import tax with some change left over I think. You can also buy from Reiner in Germany for about $208 USD.
I did find this Kawasaki discontinued part... http://vintagekawasaki.com/webshop/inde ... ts_id=1140" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false; ...........but they want $82 for it......freakin crazy
Have word out to a connection in Japan to see if he can find a better deal
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
- busa1300
- To the on ramp
- Posts: 354
- Joined: Wed Apr 11, 2012 7:17 pm
- Country: USA
- Suzuki 2-Strokes: RGV RGV RGV RGV ......
- Location: Northern Indiana
Re: GT750J soon to find new life
I found a well used fuel tap with a good diaphragm on ebay, as well as all the other parts I needed new in the package from SUZUKI. Total cost to rebuild, about $72
Now its time to rebuild the carbs....
Now its time to rebuild the carbs....
You do not have the required permissions to view the files attached to this post.
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
- kettle kid
- On the main road
- Posts: 195
- Joined: Sun Jan 30, 2011 2:30 pm
- Country: UK
- Suzuki 2-Strokes: GT380A GT750L GT750J Z900
- Location: SUNNY HERTFORDSHIRE UK ENGLAND
- Contact:
Re: GT750J soon to find new life
Hello from the UK. This is funny, as i was thinking that, i wonder what the petcock front (tap) would look like zincked? so i got them all together, and as i have a small zincking kit, i gave it ago. Looks better me thinks? Just waiting for a kit (from the states) for one of thebusa1300 wrote:The fuel tap is cleaned up now.....just need to locate a diaphragm.... Or find a entire new tap in the UK...if I can find one for $150 or less. Someone was in the tap before me, as some parts are missing......
taps, and if it goes well, i will buy 4 more? The 4th tap is for my gt75L (that I'm still to finish off) The last photo, shows 2 types of cleaning up the body's. 1st one is on the wire wheel, and the 2nd with a solvol autosol & a lemon bathroom cleaner mix. I think i like the wheel best. It depends on what finish you like? I will have a look in the garage, and see if i have one spare, to sell? I need the petcocks (taps you see) for my other project.
- kettle kid
- On the main road
- Posts: 195
- Joined: Sun Jan 30, 2011 2:30 pm
- Country: UK
- Suzuki 2-Strokes: GT380A GT750L GT750J Z900
- Location: SUNNY HERTFORDSHIRE UK ENGLAND
- Contact:
Re: GT750J soon to find new life
I got my kit from. EVERETT_POWERSPORTS
http://www.ebay.co.uk/itm/360455019548? ... 1439.l2649" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
http://www.ebay.co.uk/itm/360455019548? ... 1439.l2649" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
- kettle kid
- On the main road
- Posts: 195
- Joined: Sun Jan 30, 2011 2:30 pm
- Country: UK
- Suzuki 2-Strokes: GT380A GT750L GT750J Z900
- Location: SUNNY HERTFORDSHIRE UK ENGLAND
- Contact:
Re: GT750J soon to find new life
Hello, Just a small question? What did you use to stick the filter on the body? As there gas/petrol exsposed, what type of glue is used, and what is it called?busa1300 wrote:I found a well used fuel tap with a good diaphragm on ebay, as well as all the other parts I needed new in the package from SUZUKI. Total cost to rebuild, about $72
Now its time to rebuild the carbs....
- busa1300
- To the on ramp
- Posts: 354
- Joined: Wed Apr 11, 2012 7:17 pm
- Country: USA
- Suzuki 2-Strokes: RGV RGV RGV RGV ......
- Location: Northern Indiana
Re: GT750J soon to find new life
The two taps I had, neither had glue holding the old filters on. And when i put the new ones on, they fit snug without glue. Not sure if they need glue....?kettle kid wrote:Hello, Just a small question? What did you use to stick the filter on the body? As there gas/petrol exsposed, what type of glue is used, and what is it called?busa1300 wrote:I found a well used fuel tap with a good diaphragm on ebay, as well as all the other parts I needed new in the package from SUZUKI. Total cost to rebuild, about $72
Now its time to rebuild the carbs....
I used my sand blaster cabinet, and filled it with ground up walnut shells, to clean up the parts... luckily the plating was still pretty good. No aqua blasters anywhere close to where I am.
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
- kettle kid
- On the main road
- Posts: 195
- Joined: Sun Jan 30, 2011 2:30 pm
- Country: UK
- Suzuki 2-Strokes: GT380A GT750L GT750J Z900
- Location: SUNNY HERTFORDSHIRE UK ENGLAND
- Contact:
Re: GT750J soon to find new life
Do you have any photo's of the finished carbs?busa1300 wrote:The two taps I had, neither had glue holding the old filters on. And when i put the new ones on, they fit snug without glue. Not sure if they need glue....?kettle kid wrote:Hello, Just a small question? What did you use to stick the filter on the body? As there gas/petrol exsposed, what type of glue is used, and what is it called?busa1300 wrote:I found a well used fuel tap with a good diaphragm on ebay, as well as all the other parts I needed new in the package from SUZUKI. Total cost to rebuild, about $72
Now its time to rebuild the carbs....
I used my sand blaster cabinet, and filled it with ground up walnut shells, to clean up the parts... luckily the plating was still pretty good. No aqua blasters anywhere close to where I am.
- busa1300
- To the on ramp
- Posts: 354
- Joined: Wed Apr 11, 2012 7:17 pm
- Country: USA
- Suzuki 2-Strokes: RGV RGV RGV RGV ......
- Location: Northern Indiana
Re: GT750J soon to find new life
I'll be putting the carbs back together this weekend....just got rebuild kits a few days ago.
goint to put in new points/condensers too. Still need new spring s for the choke plungers yet....Sudco or Suzuki is the only place for those....
goint to put in new points/condensers too. Still need new spring s for the choke plungers yet....Sudco or Suzuki is the only place for those....
You do not have the required permissions to view the files attached to this post.
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
-
- Road race school
- Posts: 873
- Joined: Tue Oct 14, 2008 11:15 pm
- Location: Allen, Texas (Dallas)
Re: GT750J soon to find new life
New parts, that will get you excited!
Terry
Maybe poker's not your game, Ike. I know! Let's have a spelling contest~
74 Suzuki GT750 / 74 Suzuki T500 / 75 Suzuki GT380 / 97 & 01 Honda Magna / 03 Kawasaki KX250 / 01 Yamaha WR250F / 03 Yamaha TTR 125L
Maybe poker's not your game, Ike. I know! Let's have a spelling contest~
74 Suzuki GT750 / 74 Suzuki T500 / 75 Suzuki GT380 / 97 & 01 Honda Magna / 03 Kawasaki KX250 / 01 Yamaha WR250F / 03 Yamaha TTR 125L
- busa1300
- To the on ramp
- Posts: 354
- Joined: Wed Apr 11, 2012 7:17 pm
- Country: USA
- Suzuki 2-Strokes: RGV RGV RGV RGV ......
- Location: Northern Indiana
Re: GT750J soon to find new life
The bike is running suprisingly very good considering how long it sat. The ebay carb kits I got, worked well, but the gaskets were hard as rock. So I had to get different gaskets, and also have found out that my floats are filling up with gas. So I need new floats, and I'll get new intake carb boots too, when I pull carbs off again. I did ride it about 7 miles just to get a feel for it, and I like it better than I would have ever guessed. Out of all the bikes I have, my girl friend say it's her favorite.....I guess it's a keeper then.
You do not have the required permissions to view the files attached to this post.
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
- busa1300
- To the on ramp
- Posts: 354
- Joined: Wed Apr 11, 2012 7:17 pm
- Country: USA
- Suzuki 2-Strokes: RGV RGV RGV RGV ......
- Location: Northern Indiana
Re: GT750J soon to find new life
My new floats are in, along with a new battery, and the air box is on for the rest of the season I hope. Still needs head bearings, tires, chain, and a number of other things, to make me feel more confident I can go further than a few blocks without pushing it home. But I have put 30 miles on it so far, since my parts investment of around $300 total......
You do not have the required permissions to view the files attached to this post.
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
- busa1300
- To the on ramp
- Posts: 354
- Joined: Wed Apr 11, 2012 7:17 pm
- Country: USA
- Suzuki 2-Strokes: RGV RGV RGV RGV ......
- Location: Northern Indiana
Re: GT750J soon to find new life
I finally got the lost title straightened out, so it is now legally mine.
Plates are on their way, along with more parts....put 250 miles on it shaking it down, testing how the basic motor is goin to hold up.
Plates are on their way, along with more parts....put 250 miles on it shaking it down, testing how the basic motor is goin to hold up.
You do not have the required permissions to view the files attached to this post.
MY TWO STROKE ADDICTION
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
TZR250SP 3XV2...
RS 250 Cup bike
RGV VJ21 L
RGV VJ22 FL
RGV VJ23 T
RZ 350
GT 750 J....sold.....
SX-R 800
KD 80
JR 50
RZV 500 R
https://www.youtube.com/@wedgehorsepower9869/videos
-
- On the street
- Posts: 20
- Joined: Wed Aug 01, 2012 1:09 pm
- Country: CANADA
- Suzuki 2-Strokes: GT 750
- Location: ONTARIO / CANADA
Re: GT750J soon to find new life
Man , I love your pink bike!
She is a sweet machine
I got a black 1977 gt750.
My next bike i want an early pink bike like yours.
She is a sweet machine
I got a black 1977 gt750.
My next bike i want an early pink bike like yours.
- Old School
- On the main road
- Posts: 120
- Joined: Wed Aug 15, 2012 4:40 pm
- Country: USA
- Suzuki 2-Strokes: GT750 1000R ELR KZ1300
- Location: Indiana
Re: GT750J soon to find new life
That looks great, you did a good job with it. Where are you in Northern In?