https://www.flickr.com/photos/195427585 ... 009837012/
This is my bike you guys helped me thrus some running issues I had after I built it….been riding it about once a week all season and enjoying the heck out of it, it’s been running great.
Was riding the other day and it seemed a little off at high end, and I had run into a friend with a T500 said he had seized a cylinder due to clogged vent or something in his creating a vacuum and inhibiting oil flow, so Inthought I would check mine….
Anyhow my ent is clear and I see oil in all the lines, but the oil in the extreme right hand line is “thin” - more air in there than others, and seems to be moving fast….also I noticed little smoke from right cylinder, ore from left, so I am suspicious I am not getting enough flow and hope there is no damage, although it doesn’t seem so…
Anyway, what the best set of procedures to check into this/fix this from here? Thks in advance
GT250 oil injection questions
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- On the street
- Posts: 41
- Joined: Sat Aug 07, 2021 11:47 am
- Country: USA
- Suzuki 2-Strokes: 1974 GT250
GT250 oil injection questions
74 CL200 scrambled
75 GT250 cafe
71 A7 Avenger 350
85 RZ 350
77 XS400 “No XS”
73 H1 500 Aubergine
87 GSX-R750
85 GPz900R Ninja GWB
83 CB1100F
75 GT250 cafe
71 A7 Avenger 350
85 RZ 350
77 XS400 “No XS”
73 H1 500 Aubergine
87 GSX-R750
85 GPz900R Ninja GWB
83 CB1100F