I've disassembled the forks on my GT750 completely in order to do the mods necessary to install Race Tech emulators. While they're apart, I thought I might as well replace the fork seals even though they weren't leaking.
So here's my question: what is the preferred way to install the new seals AND does it make more sense to install the seals after I rebuild each fork leg or before I rebuild the fork leg?
THANKS
Buffalo fork seal install question
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- Willie
- Around the block
- Posts: 73
- Joined: Mon Sep 28, 2009 8:06 am
- Country: USA
- Suzuki 2-Strokes: GT750, GS1100E, GS1100G
- Location: Kingsport, TN
Buffalo fork seal install question
I've been everywhere from Bangor all the way to mighty Maine!