Page 1 of 1
GT750 BS40 Carb Floats
Posted: Mon Mar 11, 2024 5:14 am
by asphalt900
Good Afternoon Gents! First post and new member. I'm in Kansas, USA. Working on some of those BS40's and have ran across a couple pin-holed floats, sinkers. What is a good source for these? Don't seem to be available NOS where i'm at. But..seem to be littered on ebay. Always being suspicious of that forums selection, where do You fella source one's for Your GT's? Clay
Re: GT750 BS40 Carb Floats
Posted: Wed Mar 13, 2024 2:18 pm
by karl pa
When I replaced mine they were still available from Suzuki, if they are no longer available, you may be limited on options, the older bikes sometimes require ebay, but be cautious, parts are advertised to fit your model but don't always.
Re: GT750 BS40 Carb Floats
Posted: Thu Mar 14, 2024 4:27 am
by jabcb
CruzinImage has reproduction floats that they claim fit the 80-82 GS450s.
Many of those GS450s have CV carbs & use the same floats as the GT750. (Checked a few but all of them via Partzilla.)
https://www.cruzinimage.net/2018/04/09/ ... t-include/
https://www.ebay.com/itm/134730860760
If they fit, you can set the fuel level to account for slight differences in weight & buoyancy.