Suzuki 2 Strokes

Posted: **Sat Apr 25, 2009 4:22 pm**

I posted this in BMBI as well...

If you need replacement forks for a GT250 but don't care about them being original, try a set off a Hond* CMX250 Rebel... They are the same diameter as the GT forks and the axle diameter is exactly the same as the GT as well... No shims, special bearings, or else to adapt the wheel to the fork lowers...NA-DA...

Tom

Posted: **Sun May 17, 2009 6:00 pm**

Cut down 82 GS1100 rotor, 90's CMX Rebel 250 forks and caliper, stock GT250 hub... use the stock GT mushroom spacer and the CMX straight (LH) spacer....

Posted: **Sun May 17, 2009 6:07 pm**

Thats looking very tidy and neat Tom, great to know it fit up so easily.

Posted: **Sun May 17, 2009 8:28 pm**

That would be cool if that was also a simple upgrade for the T500's

Posted: **Mon May 18, 2009 5:30 am**

They're only a mm smaller at 33mm.... How different are the lower triple and stem?

Suzuki 2 Strokes

GT250 - Fork replacement / alternative

GT250 - Fork replacement / alternative