Mikuni BS40 CV carb infomation, GT750
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- tz375
- Moto GP
- Posts: 6206
- Joined: Mon Nov 03, 2008 10:47 am
- Location: Illinois
Mikuni BS40 CV carb infomation, GT750
The page on carbs has been updated to include SUDCO part numbers for jets plus a better explanation of the difference between BS type pilot jets and regular VM style pilot jets
http://pinkpossum.com/GT750/carb/BS40carbs.htm
Not sure where the right place is for this.
http://pinkpossum.com/GT750/carb/BS40carbs.htm
Not sure where the right place is for this.
- oldjapanesebikes
- Moto GP
- Posts: 3229
- Joined: Sat Feb 07, 2009 12:43 am
- Country: Canada
- Suzuki 2-Strokes: GT750(Jx3,L,M,A,B),T500
- Location: Ontario
- Contact:
Re: Mikuni BS40 CV carbs
Nicely done - thanks ! I would probably have put it in the 'Repairs' section, but really it doesn't matter.
I see on MikeSX site he also has other parts which seem reasonably priced and might fit - viton tipped float valves for example. He also shows a choke lever that looks a lot like the original one in the Suzuki's under his part number 48-0777. Wonder if it would fit ?
I see on MikeSX site he also has other parts which seem reasonably priced and might fit - viton tipped float valves for example. He also shows a choke lever that looks a lot like the original one in the Suzuki's under his part number 48-0777. Wonder if it would fit ?
Ian
If at first you don't succeed, just get a bigger hammer !
If at first you don't succeed, just get a bigger hammer !
- Suzsmokeyallan
- Moto GP
- Posts: 4326
- Joined: Fri Oct 24, 2008 9:11 am
- Location: Mostly Barbados, sometimes Florida and western Canada
- Contact:
Re: Mikuni BS40 CV carbs
If its like the one in the photo, its the exact part for the buffalo CV carbs.
Two strokes, its just that simple.
69 Suz U70
69 Suz T500
72 Suz GT750 cafe
74 Suz TS250
74 Suz GTXVR project
75 Suz RE5
75 Suz GT750
76 Suz TS400
76 Suz GT750
81 Suz GSX1100
86 Suz RG500x2
88 Hon CR500
93 Hon CBR900RR
98 Suz GSF1200x3
15 Kaw Ninja H2
69 Suz U70
69 Suz T500
72 Suz GT750 cafe
74 Suz TS250
74 Suz GTXVR project
75 Suz RE5
75 Suz GT750
76 Suz TS400
76 Suz GT750
81 Suz GSX1100
86 Suz RG500x2
88 Hon CR500
93 Hon CBR900RR
98 Suz GSF1200x3
15 Kaw Ninja H2
- oldjapanesebikes
- Moto GP
- Posts: 3229
- Joined: Sat Feb 07, 2009 12:43 am
- Country: Canada
- Suzuki 2-Strokes: GT750(Jx3,L,M,A,B),T500
- Location: Ontario
- Contact:
Re: Mikuni BS40 CV carbs
The photo is off the MikeSX web site - it does look the same as Suzuki used doesn't it ?Suzsmokeyallan wrote:If its like the one in the photo, its the exact part for the buffalo CV carbs.
Ian
If at first you don't succeed, just get a bigger hammer !
If at first you don't succeed, just get a bigger hammer !
- tz375
- Moto GP
- Posts: 6206
- Joined: Mon Nov 03, 2008 10:47 am
- Location: Illinois
Re: Mikuni BS40 CV carbs
Early XS650s used BS series carbs in 38 and 34mm. Later BS carbs are different in too many ways, but the early ones have some parts in common. And at those prices, it pays to experiment.
I have Z-6 needle jets and while in theory they are significantly larger than GT Z-0 jets, the matching needles are also fatter but with a different taper, so there is scope to tilt the fuel slope slightly for different pipes and filters.
I have Z-6 needle jets and while in theory they are significantly larger than GT Z-0 jets, the matching needles are also fatter but with a different taper, so there is scope to tilt the fuel slope slightly for different pipes and filters.
- Coyote
- Moto GP
- Posts: 3404
- Joined: Tue Oct 21, 2008 2:41 pm
- Country: USA
- Suzuki 2-Strokes: GT550x2, GT750, GS1000
- Location: Tulsa, Oklahoma
Re: Mikuni BS40 CV carbs, GT750
The step leading to the pin looks way too deep. I have a BS40 choke lever here and the step is 3mm. That looks like 6 or 7mm. Maybe more. I seriously doubt it would fit. I sure would like to have that bushing though.
I was born with nothing and still have most of it left.
.
1978 GS1000C
1976 GT550 ongoing money pit.
.
1978 GS1000C
1976 GT550 ongoing money pit.
- tz375
- Moto GP
- Posts: 6206
- Joined: Mon Nov 03, 2008 10:47 am
- Location: Illinois
Re: Mikuni BS40 CV carbs, GT750
I hear you Chris. I have a lever nicely re-plated but no stepped bushing and I'm missing that small link that goes on teh choke rod. I'm thinking that I'll have to grab a piece of steel and fabricate one
- Coyote
- Moto GP
- Posts: 3404
- Joined: Tue Oct 21, 2008 2:41 pm
- Country: USA
- Suzuki 2-Strokes: GT550x2, GT750, GS1000
- Location: Tulsa, Oklahoma
Re: Mikuni BS40 CV carbs, GT750
tz. Here is a drawing I made up for a replacement bushing. This might help. I am going to try to get this made at the machine shop I used to work for. Maybe I should get 10 made as this is a very common lost missing link.
The choke lever is formed from 2mm steel, so the .090 land will allow you to mount a retaining washer and still have about .010 play.
The choke lever is formed from 2mm steel, so the .090 land will allow you to mount a retaining washer and still have about .010 play.
I was born with nothing and still have most of it left.
.
1978 GS1000C
1976 GT550 ongoing money pit.
.
1978 GS1000C
1976 GT550 ongoing money pit.
- tz375
- Moto GP
- Posts: 6206
- Joined: Mon Nov 03, 2008 10:47 am
- Location: Illinois
Re: Mikuni BS40 CV carbs, GT750
Cool. Thanks for that.
- Bluesmokebaz
- Still in the Driveway
- Posts: 2
- Joined: Fri Jan 06, 2012 1:37 pm
- Location: UK MIDLANDS
- Contact:
Re: Mikuni BS40 CV carbs, GT750
I have fitted the Yamaha lever but had some stainless steel choke rods made 5mm shorter and all was good cheers BAZ.
- Suzsmokeyallan
- Moto GP
- Posts: 4326
- Joined: Fri Oct 24, 2008 9:11 am
- Location: Mostly Barbados, sometimes Florida and western Canada
- Contact:
Re: Mikuni BS40 CV carbs, GT750
Mikes XS has the eight hole choke assembly gasket as a separate item, item #48-2011
As mentioned already Mikes XS has the choke lever assembly, I stand corrected it does have a slightly longer stepped collar and a deeper standoff, but it has the knob thats usually missing, item #48-0777
As mentioned already Mikes XS has the choke lever assembly, I stand corrected it does have a slightly longer stepped collar and a deeper standoff, but it has the knob thats usually missing, item #48-0777
Two strokes, its just that simple.
69 Suz U70
69 Suz T500
72 Suz GT750 cafe
74 Suz TS250
74 Suz GTXVR project
75 Suz RE5
75 Suz GT750
76 Suz TS400
76 Suz GT750
81 Suz GSX1100
86 Suz RG500x2
88 Hon CR500
93 Hon CBR900RR
98 Suz GSF1200x3
15 Kaw Ninja H2
69 Suz U70
69 Suz T500
72 Suz GT750 cafe
74 Suz TS250
74 Suz GTXVR project
75 Suz RE5
75 Suz GT750
76 Suz TS400
76 Suz GT750
81 Suz GSX1100
86 Suz RG500x2
88 Hon CR500
93 Hon CBR900RR
98 Suz GSF1200x3
15 Kaw Ninja H2
- Suzukidave
- Moto GP
- Posts: 3980
- Joined: Fri Oct 24, 2008 5:55 pm
- Country: US
- Suzuki 2-Strokes: GT750 x2 97 -1200 Bandit 86 GSXR1100
- Location: Lancaster Pa.
Re: Mikuni BS40 CV carb infomation, GT750
Youtube carb video http://www.youtube.com/watch?v=Cukul7Tq ... 687CE68076" onclick="window.open(this.href);return false;
the older i get the faster i was
-
- Expert racer
- Posts: 1483
- Joined: Tue May 18, 2010 5:38 pm
- Country: USA
- Suzuki 2-Strokes: Suz, Yam, Honda, Kaw.
- Location: New Hampshire
Re: Mikuni BS40 CV carb infomation, GT750
Wow!!!!!!!
I just realized for th e GT750 with Cvs the pilot jet is a BS30/96 not a VM22/210
I just realized for th e GT750 with Cvs the pilot jet is a BS30/96 not a VM22/210
Current Bikes
74 GT250 (T350 upgrade),
76 GT250 (T350 upgrade),
71 T350,
70 T350,
74 GT380,
75 T500,
73 GT550,
75 GT750,
72 Yamaha DS7 (R5 upgrade),
77 Yamaha RD400 (Daytona Cyls),
74 GT250 (T350 upgrade),
76 GT250 (T350 upgrade),
71 T350,
70 T350,
74 GT380,
75 T500,
73 GT550,
75 GT750,
72 Yamaha DS7 (R5 upgrade),
77 Yamaha RD400 (Daytona Cyls),
-
- AMA Superbike
- Posts: 1769
- Joined: Tue Oct 14, 2008 6:47 pm
- Location: Blythewood, SC, USA
Re: Mikuni BS40 CV carb infomation, GT750
Vintageman wrote:Wow!!!!!!!
I just realized for th e GT750 with Cvs the pilot jet is a BS30/96 not a VM22/210
Pilots for the BS carbs are very different, but they are numbered the same. Confusing. Ask Coyote about the effect of getting them mixed up. Lots of us have learned that lesson the hard way.
Lane
If you stroke it more than twice; you're playing with it.
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
- Suzukidave
- Moto GP
- Posts: 3980
- Joined: Fri Oct 24, 2008 5:55 pm
- Country: US
- Suzuki 2-Strokes: GT750 x2 97 -1200 Bandit 86 GSXR1100
- Location: Lancaster Pa.
Re: Mikuni BS40 CV carb infomation, GT750
Looks like we have a intruder
the older i get the faster i was