Looking for some sprocket advice on my T 500. I purchased a new 530x 112 link chain and i replaced the front sprocket with the stock 15 tooth.
I also ordered a stock size 33t sprocket got the rear. After I placed the order, I realize that it currently had a 40t on it from Previous owner. I bought the bike as a complete basket case so I never actually have driven it yet, so I can't comment on how it ran with the 40T.
It has chambers and PODs. I went ahead and canceled my order for the 33 tooth sprocket and figured I might stick with a 40. There isn't a chance in hell that I will ever take this bike up over 80 MPH, heck, probably won't go much faster than 65 MPH, so top speed is not a concern. That's why I am thinking maybe I should get a 40T.
Thoughts?
T500 sprocket
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- To the on ramp
- Posts: 337
- Joined: Fri Jun 19, 2015 5:14 am
- Country: USA
- Suzuki 2-Strokes: T500, S32-2, GT185
- Jimroid
- To the on ramp
- Posts: 309
- Joined: Sun Feb 21, 2016 8:32 pm
- Country: USA
- Suzuki 2-Strokes: GT500 T500 GT750
- Location: Pisgah Forest, N.C. USA
Re: T500 sprocket
The stock 15/33 is very tall. Many people put the very common 40 rear on. You will be happy with 15/40. Make sure your new chain is long enough.
-
- Expert racer
- Posts: 1483
- Joined: Tue May 18, 2010 5:38 pm
- Country: USA
- Suzuki 2-Strokes: Suz, Yam, Honda, Kaw.
- Location: New Hampshire
Re: T500 sprocket
I was running 15/35. Now running 15/33 (stock) on my 1975 T500M Jemco Chambers and early (70/71) top end (IMO much better earlier cylinders better than later than later for overall power).
I like the 15/33 better .
33, 35, 40 tooth rear ,... Now are you confused ?
What I can say is the bike has plenty of torque and pulls well. With the 33 vs 35 I use 3rd more now than 4th when driving it spiritedly. When cruising 55 -70 mph, using the 33 vs 35 it keeps the RPMs 6% lower and as I said it pulls like a tractor so it is still fun using 5th smooth easy cruising for a good laid back time. A 40 vs 33 you will be 21% higher in RPMs for any same gear.
I like the 15/33 better .
33, 35, 40 tooth rear ,... Now are you confused ?
What I can say is the bike has plenty of torque and pulls well. With the 33 vs 35 I use 3rd more now than 4th when driving it spiritedly. When cruising 55 -70 mph, using the 33 vs 35 it keeps the RPMs 6% lower and as I said it pulls like a tractor so it is still fun using 5th smooth easy cruising for a good laid back time. A 40 vs 33 you will be 21% higher in RPMs for any same gear.
Current Bikes
74 GT250 (T350 upgrade),
76 GT250 (T350 upgrade),
71 T350,
70 T350,
74 GT380,
75 T500,
73 GT550,
75 GT750,
72 Yamaha DS7 (R5 upgrade),
77 Yamaha RD400 (Daytona Cyls),
74 GT250 (T350 upgrade),
76 GT250 (T350 upgrade),
71 T350,
70 T350,
74 GT380,
75 T500,
73 GT550,
75 GT750,
72 Yamaha DS7 (R5 upgrade),
77 Yamaha RD400 (Daytona Cyls),