Need help with reassembly. 90% sure this is how the lower cartridge came out. Is piston right or collared end down?
The allen screw at bottom of fork lower screws into this assembly, but is this assembly inside the inner chrome tube?
Parts fiche not particularly helpful....Not pictured is the inner tube, spring, spring spacer tube, and 2 spring retainers one which is split. any difference where I use the split retainer?
Any guidance appreciated.
fork assembly
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- Ben
- On the street
- Posts: 43
- Joined: Fri May 17, 2013 9:09 am
- Country: Canada
- Suzuki 2-Strokes: 1 too few
fork assembly
You do not have the required permissions to view the files attached to this post.
Ben in Canada
71 CB500
74 RV125
75 RV125
84 RZ500
85 RZ500
94 DAJIBAN
00 VFR800
71 CB500
74 RV125
75 RV125
84 RZ500
85 RZ500
94 DAJIBAN
00 VFR800
- Ben
- On the street
- Posts: 43
- Joined: Fri May 17, 2013 9:09 am
- Country: Canada
- Suzuki 2-Strokes: 1 too few
Re: fork assembly
I reinstalled however the foremost piston piece I flipped around so the end with an edge sits at the end of the inner fork tube. ..not sure thats right but made most sense to me...
Ben in Canada
71 CB500
74 RV125
75 RV125
84 RZ500
85 RZ500
94 DAJIBAN
00 VFR800
71 CB500
74 RV125
75 RV125
84 RZ500
85 RZ500
94 DAJIBAN
00 VFR800