mk3 side panel question
Moderators: oldjapanesebikes, H2RICK, Suzsmokeyallan
- akendall1966
- To the on ramp
- Posts: 242
- Joined: Sat Jun 28, 2014 1:22 am
- Country: United Kingdom
- Suzuki 2-Strokes: T500_MKIII
mk3 side panel question
I think the panel on mine was from an earlier Cobra going by the badge's. Its a smooth pressing without the ridge \line in the pressing. At what point did the ridge appear, with the correct badge and old holes filled would this panel be correct?
-
- To the on ramp
- Posts: 276
- Joined: Tue Jan 22, 2013 3:40 pm
- Country: Ontario, Canada
- Suzuki 2-Strokes: B100P,T200, 68,70,74 T500,GS650G DL1000
Re: mk3 side panel question
1969 was the first year for the plastic side covers and they remained the same with the exception of the badges. The Cobra cover was more triangular and was metal.
The pic of the side cover is from my MKIII.
Cheers....Fred
The pic of the side cover is from my MKIII.
Cheers....Fred
68 B100P x2
68 T500 Cobra x3
69 T500
70 T500 x2
74 T500
76 GT500
76 GT185 x2
81 GS650G x2
04 DL1000
68 T500 Cobra x3
69 T500
70 T500 x2
74 T500
76 GT500
76 GT185 x2
81 GS650G x2
04 DL1000
- akendall1966
- To the on ramp
- Posts: 242
- Joined: Sat Jun 28, 2014 1:22 am
- Country: United Kingdom
- Suzuki 2-Strokes: T500_MKIII
Re: mk3 side panel question
Bloop,
Perfect, yes mine has the metal one from from a pre69 Cobra. Obviouly must have lost / damaged the original at some point.
I see repros on Ebay, so I'll get one of those.
Thank you.
Perfect, yes mine has the metal one from from a pre69 Cobra. Obviouly must have lost / damaged the original at some point.
I see repros on Ebay, so I'll get one of those.
Thank you.