GT185 Grab Bar

Suzuki two-stroke bikes and parts, one man's treasure is another man's treasure!

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
User avatar
GTFIZZ
On the street
Posts: 21
Joined: Thu Oct 29, 2020 1:38 am
Country: Guernsey
Suzuki 2-Strokes: Gt185 1976 , Yamaha FS1e 1975

GT185 Grab Bar

Post by GTFIZZ »

Hi
Has anyone got one they would like to sell(UK) or if not can anyone supply some measurements or maybe some pictures and diagrams?
Thanks in anticipation
Neil
dollydog
Yeah Man, the Interstate
Posts: 630
Joined: Fri Aug 11, 2017 7:09 am
Country: england
Suzuki 2-Strokes: several gt250 ramairs

Re: GT185 Grab Bar

Post by dollydog »

i haven't got a grabrail, but i've got a gt185 chrome rear rack with grabrail built in. genuine nos from the early 70's. very, very little surface rust - it is well over 40 years old and been hanging up in my shed for many years. complete with original brackets :D
cheers, dd.
GTS250 road registered. TS250 engine, Ramair frame.
GT250 big bang road registered. Both pistons fire the same time. USD forks.
GT285 road registered. Overbored - 58mm and TS125 +2 pistons fitted.
GT10 road registered. '65 T10 engine, GT250 frame.
User avatar
jabcb
Moto GP
Posts: 4240
Joined: Mon Dec 13, 2010 4:32 pm
Country: USA
Suzuki 2-Strokes: 69 T350 thru 75 GT750
Location: southwestern Pennsylvania

Re: GT185 Grab Bar

Post by jabcb »

Forum member johnakay probably will make you one. You’ll just have to get it chromed.
I have one of his luggage racks — he does good work.
viewtopic.php?f=23&t=11184&start=15
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more

Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
User avatar
GTFIZZ
On the street
Posts: 21
Joined: Thu Oct 29, 2020 1:38 am
Country: Guernsey
Suzuki 2-Strokes: Gt185 1976 , Yamaha FS1e 1975

Re: GT185 Grab Bar

Post by GTFIZZ »

dollydog wrote: Sun Nov 15, 2020 12:47 pm i haven't got a grabrail, but i've got a gt185 chrome rear rack with grabrail built in. genuine nos from the early 70's. very, very little surface rust - it is well over 40 years old and been hanging up in my shed for many years. complete with original brackets :D
cheers, dd.
Any pictures?
Might be interested
User avatar
GTFIZZ
On the street
Posts: 21
Joined: Thu Oct 29, 2020 1:38 am
Country: Guernsey
Suzuki 2-Strokes: Gt185 1976 , Yamaha FS1e 1975

Re: GT185 Grab Bar

Post by GTFIZZ »

jabcb wrote: Sun Nov 15, 2020 3:26 pm Forum member johnakay probably will make you one. You’ll just have to get it chromed.
I have one of his luggage racks — he does good work.
viewtopic.php?f=23&t=11184&start=15
Cheers
Will PM him
dollydog
Yeah Man, the Interstate
Posts: 630
Joined: Fri Aug 11, 2017 7:09 am
Country: england
Suzuki 2-Strokes: several gt250 ramairs

Re: GT185 Grab Bar

Post by dollydog »

i'll get back to you asap with a photo. busy with the reed valve build at the mo. i am in england - derbyshire :wth:
cheers, dd.
GTS250 road registered. TS250 engine, Ramair frame.
GT250 big bang road registered. Both pistons fire the same time. USD forks.
GT285 road registered. Overbored - 58mm and TS125 +2 pistons fitted.
GT10 road registered. '65 T10 engine, GT250 frame.
User avatar
GTFIZZ
On the street
Posts: 21
Joined: Thu Oct 29, 2020 1:38 am
Country: Guernsey
Suzuki 2-Strokes: Gt185 1976 , Yamaha FS1e 1975

Re: GT185 Grab Bar

Post by GTFIZZ »

dollydog wrote: Mon Nov 16, 2020 6:38 am i'll get back to you asap with a photo. busy with the reed valve build at the mo. i am in england - derbyshire :wth:
cheers, dd.
Ok thanks, no rush
Would have to be sent if a deal is struck😉 as I’m in Guernsey 😳
Post Reply