I recently picked up a complete Wiseco piston/ring/wrist-pin/circlip kit for a 750 from fleaBay and have subsequently discovered I may not be able to use them.
They are 4th(?) oversize - 72mm.
None of the barrels I have are anywhere near that, i.e. The largest any of them are bored to is 70.5mm, which means to get these pistons to fit, I'm gonna have to bore a lot from a set of barrels, essentially using up a set of sleeves and potentially negating any future boring.
Now...
I'm keen to swap this set for a 1st or maybe 2nd oversize kit/set of brand-new Wiseco (preferably) or OEM pistons/rings/wrist-pins/circlips.
Or, I could sell this set and track down a set from Mr Miller or the like...
PM me for more details about either scenario and a price.
Cheers
Paul
Wiseco GT750 piston kit...
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- To the on ramp
- Posts: 342
- Joined: Tue Feb 17, 2009 1:20 am
- Country: Australia
- Suzuki 2-Strokes: T20 GT750L RE5A GSX1100S RG500G GSX-R1100N
- Location: QLD
-
- Around the block
- Posts: 81
- Joined: Wed Feb 25, 2009 11:31 am
72mm GT750 pistons
Do you still have the piston set? Would be interested in buying/swaping them
if you're still iin the mood...
Kris Bernstein
if you're still iin the mood...
Kris Bernstein