I am finding GT550 parts a little difficult to source.
The right crank outer seal is listed as 09289-32004 which seems almost impossible to find. It is listed as 32x62 in Partzilla. I have found a seal that lists the above number as well as 09289-32001 as being applicable. Is this a usable substitute?
Thanks Dave
GT550 crank seal clarification
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
kawonda750
- On the main road
- Posts: 117
- Joined: Wed Nov 28, 2012 4:48 pm
- Country: canada
- Suzuki 2-Strokes: 74 gt550, 88 Yamaha FZR400, 2019 Kaw Z900RS
- Location: penetang, ontario
-
Alan H
- Moto GP
- Posts: 3172
- Joined: Thu Feb 16, 2012 11:50 am
- Country: England
- Suzuki 2-Strokes: 4 x GT550s - J, M, A, B.
- Location: The Republic of South Yorkshire
Re: GT550 crank seal clarification
Must admit, in the past I have just taken my dud cranks to a crank resusitator and they come back sorted.
Think of how stupid the average person is, then realise that half of them are more stupid than that.
-
jabcb
- Moto GP
- Posts: 4241
- Joined: Mon Dec 13, 2010 4:32 pm
- Country: USA
- Suzuki 2-Strokes: 69 T350 thru 75 GT750
- Location: southwestern Pennsylvania
Re: GT550 crank seal clarification
Per the old printed parts manual on https://www.oldjapanesebikes.com/mraxl_ ... /index.php
09289-32001 was the part # for J-L models.
I have the printed manual for K-B models purchased from the New Zealand eBay seller.
09289-32001 was for L-B models.
The other number probably is related to an inventory simplification done after these bikes were manufactured.
09289-32001 was the part # for J-L models.
I have the printed manual for K-B models purchased from the New Zealand eBay seller.
09289-32001 was for L-B models.
The other number probably is related to an inventory simplification done after these bikes were manufactured.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
-
kawonda750
- On the main road
- Posts: 117
- Joined: Wed Nov 28, 2012 4:48 pm
- Country: canada
- Suzuki 2-Strokes: 74 gt550, 88 Yamaha FZR400, 2019 Kaw Z900RS
- Location: penetang, ontario
Re: GT550 crank seal clarification
Great. Thank you.
I have saved the parts manual. As usual with my Kawasaki searches, thank you to Dale, mraxl. He has saved me again.
As an aid to others, I found too late, of course, PJMotorcycle Engineering who had crank bearing sets as well as seal sets. Too bad I saw the seals set after going all over ebay and having to order seals, and pay shipping, to 3 different vendors..
Oh well, it's only money.....
I have saved the parts manual. As usual with my Kawasaki searches, thank you to Dale, mraxl. He has saved me again.
As an aid to others, I found too late, of course, PJMotorcycle Engineering who had crank bearing sets as well as seal sets. Too bad I saw the seals set after going all over ebay and having to order seals, and pay shipping, to 3 different vendors..
Oh well, it's only money.....
