hi all,
i wondered if anyone knew the location of the zener diode on my 1971 ts125 duster?
the wiring on my bike was a mess so i have made up a "short" harness as a temp measure,just to get it road legal.
i have just about got everything working but need to use a zener diode in the feed for the lights,there was nothing fitted to the actual bike so im assuming that it is inside the wiring harness.
i dont want to just rip my original harness apart looking for it as im hoping to re-use it at some stage so was hoping to keep the damage to a minimum by knowing where it is located.can anyone help please?
thanks in advance.
zener diode location
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
taff61
- Still in the Driveway
- Posts: 8
- Joined: Thu Sep 20, 2018 11:55 am
- Country: south wales
- Suzuki 2-Strokes: gt750,ts125j
-
markush
- To the on ramp
- Posts: 201
- Joined: Thu Oct 03, 2013 4:39 am
- Country: Germany
- Suzuki 2-Strokes: GT250/380
- Contact:
Re: zener diode location
Hi.
There are more than one options.
You do not need necessarily a zener diode.
See page 94 from TS125 service Manual
There are more than one options.
You do not need necessarily a zener diode.
See page 94 from TS125 service Manual
You do not have the required permissions to view the files attached to this post.
