Passenger Peg Vibration

[grumpy56]

Hello All. The passenger footpegs on the early GT380s vibrate horribly due to being the muffler attachment to the frame. Has anyone used a silicone or some other method to isolate the bracket from the mufflers to reduce some of the tingles? Thanks.

[joolstacho]

Don't think silicone would help - you have to tighten that stuff pretty tight, it'd just squeeze out of the joint.
If you could rig up a proper isolated rubber mount like one of those cotton reel rubber mounts (some exhausts use them) that could work.

[grumpy56]

Thank you, There is not much clearance on that exhaust mount, but will try something like that.

[Alan H]

I cut some thin rubber to fit between the inner & outer brackets and this helped on my 550s.

[jabcb]

Forum member markush has some pics of the exhaust mount.
See the links here: http://suzuki-gt380.de/gt380_dateien/Auspuff-Halterung/

[grumpy56]

Thank you.