excessive smoke right cylinder
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- On the main road
- Posts: 116
- Joined: Wed Nov 28, 2012 4:48 pm
- Country: canada
- Suzuki 2-Strokes: 74 gt550, 88 Yamaha FZR400, 2019 Kaw Z900RS
- Location: penetang, ontario
excessive smoke right cylinder
Well, I have it all back together and have a smoke screen coming from the left cylinder. I had the crank redone with bearings and new seals so I am hoping it not a seal. Changed the plugs around with no difference. Any ideas?
SRIS ? stuck oil feed valve at the cylinder? Although it doesn't seem to be hydro locked ?
It is blue smoke so I don't think it is burning coolant.
Any input would be appreciated.
Thanks
Dave
SRIS ? stuck oil feed valve at the cylinder? Although it doesn't seem to be hydro locked ?
It is blue smoke so I don't think it is burning coolant.
Any input would be appreciated.
Thanks
Dave
-
- Yeah Man, the Interstate
- Posts: 503
- Joined: Sat Sep 05, 2015 3:14 pm
- Country: us
- Suzuki 2-Strokes: GT
- Location: southeast pa
Re: excessive smoke right cylinder
It could be a leaking oil feed check valve, but I would give it a good run, it should clear after it warms up and a few miles on it
76 GT185
77 GT250
77 GT380
76 GT500
73 GT550
73 GT750
74 GT750
71 T250 scrambler
75 T500 cafe
77 GT250
77 GT380
76 GT500
73 GT550
73 GT750
74 GT750
71 T250 scrambler
75 T500 cafe
- jabcb
- Moto GP
- Posts: 4241
- Joined: Mon Dec 13, 2010 4:32 pm
- Country: USA
- Suzuki 2-Strokes: 69 T350 thru 75 GT750
- Location: southwestern Pennsylvania
Re: excessive smoke right cylinder
A few years ago the right cylinder on my gray GT750 was a smoke screen generator. Was a problem with the spark plug cap.
Also had a smokey GT250 cylinder that was due to either the carbs or ignition, or possibly both. Did a complete carb service & replaced the points+condensers, so I’m not exactly sure what fixed the issue.
Also had a smokey GT250 cylinder that was due to either the carbs or ignition, or possibly both. Did a complete carb service & replaced the points+condensers, so I’m not exactly sure what fixed the issue.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
-
- Yeah Man, the Interstate
- Posts: 590
- Joined: Tue Mar 10, 2015 12:35 pm
- Country: WALES
- Suzuki 2-Strokes: suzuki gt 550j
- Location: Wales
Re: excessive smoke right cylinder
Definately not hydro locked it wouldn't run. +1 on giving it a good run to clear out the cylinder.
98 carb Blackbird and GT550j
-
- On the main road
- Posts: 116
- Joined: Wed Nov 28, 2012 4:48 pm
- Country: canada
- Suzuki 2-Strokes: 74 gt550, 88 Yamaha FZR400, 2019 Kaw Z900RS
- Location: penetang, ontario
Re: excessive smoke right cylinder
Thanks for the input. I will cover all of the points. Timing is dead on after confirming yesterday.
-
- On the main road
- Posts: 116
- Joined: Wed Nov 28, 2012 4:48 pm
- Country: canada
- Suzuki 2-Strokes: 74 gt550, 88 Yamaha FZR400, 2019 Kaw Z900RS
- Location: penetang, ontario
Re: excessive smoke right cylinder
So, I have it all together. The carbs have been ultra sonically cleaned, twice. Timing is dead on. Idle is good and balanced with a vacuum gauge. Float levels are set. There is no power. It idles but when I take off it is not too impressive.
Any ideas? What would a bad condenser do? Honestly, I did not replace them when I put in new points.
I am stumped here.
Thanks
Dave
Any ideas? What would a bad condenser do? Honestly, I did not replace them when I put in new points.
I am stumped here.
Thanks
Dave
-
- Yeah Man, the Interstate
- Posts: 590
- Joined: Tue Mar 10, 2015 12:35 pm
- Country: WALES
- Suzuki 2-Strokes: suzuki gt 550j
- Location: Wales
Re: excessive smoke right cylinder
So first we need to identify the bike? I think its a GT750? If so is it an early bike fitted with round slide carbs or the later one fitted with different BS40 carbs?
I would check that the exhaust baffles are clean and the exhausts are not restricted in any way.
It would also be a good thing to check engine compression with a gauge.
What is the bike battery like? If it is old or the cells are not all topped up it will fail under load.
Try using a multimeter across the terminals to find the voltage. Then start the bike and rev to 3000 and see what the meter reads. Check what voltage you have at the coils. A lot of power can be lost between the battery and coils as it goes around the loom and connector blocks.
I would check that the exhaust baffles are clean and the exhausts are not restricted in any way.
It would also be a good thing to check engine compression with a gauge.
What is the bike battery like? If it is old or the cells are not all topped up it will fail under load.
Try using a multimeter across the terminals to find the voltage. Then start the bike and rev to 3000 and see what the meter reads. Check what voltage you have at the coils. A lot of power can be lost between the battery and coils as it goes around the loom and connector blocks.
98 carb Blackbird and GT550j
-
- On the main road
- Posts: 116
- Joined: Wed Nov 28, 2012 4:48 pm
- Country: canada
- Suzuki 2-Strokes: 74 gt550, 88 Yamaha FZR400, 2019 Kaw Z900RS
- Location: penetang, ontario
Re: excessive smoke right cylinder
Sorry. 74 GT750 new battery 12.9 V
I will check the baffles.
Thank you .
I will check the baffles.
Thank you .
-
- Yeah Man, the Interstate
- Posts: 590
- Joined: Tue Mar 10, 2015 12:35 pm
- Country: WALES
- Suzuki 2-Strokes: suzuki gt 550j
- Location: Wales
Re: excessive smoke right cylinder
Sorry your BS40 carbs are not my field perhaps someone else could assist
98 carb Blackbird and GT550j
-
- Yeah Man, the Interstate
- Posts: 503
- Joined: Sat Sep 05, 2015 3:14 pm
- Country: us
- Suzuki 2-Strokes: GT
- Location: southeast pa
Re: excessive smoke right cylinder
Do you have the correct Mikuni jets in carbs? Also, do you have surging issues like most 74 have?
76 GT185
77 GT250
77 GT380
76 GT500
73 GT550
73 GT750
74 GT750
71 T250 scrambler
75 T500 cafe
77 GT250
77 GT380
76 GT500
73 GT550
73 GT750
74 GT750
71 T250 scrambler
75 T500 cafe
-
- On the main road
- Posts: 116
- Joined: Wed Nov 28, 2012 4:48 pm
- Country: canada
- Suzuki 2-Strokes: 74 gt550, 88 Yamaha FZR400, 2019 Kaw Z900RS
- Location: penetang, ontario
Re: excessive smoke right cylinder
I have genuine Mikuni parts. I don't know about surging because it is not running with enough power to surge.
-
- Yeah Man, the Interstate
- Posts: 503
- Joined: Sat Sep 05, 2015 3:14 pm
- Country: us
- Suzuki 2-Strokes: GT
- Location: southeast pa
Re: excessive smoke right cylinder
I would replace them, to eliminate them as cause. But I wonder if it is running lean (air leaks ?) or rich causing issue, I admit I am not very good at carburetion. Did you do a compression test to make sure top end is right? You did put the right piston in the right cylinder?kawonda750 wrote: What would a bad condenser do? Honestly, I did not replace them when I put in new points
Do all 3 header pipes get hot or does one feel cooler?
76 GT185
77 GT250
77 GT380
76 GT500
73 GT550
73 GT750
74 GT750
71 T250 scrambler
75 T500 cafe
77 GT250
77 GT380
76 GT500
73 GT550
73 GT750
74 GT750
71 T250 scrambler
75 T500 cafe
-
- On the main road
- Posts: 116
- Joined: Wed Nov 28, 2012 4:48 pm
- Country: canada
- Suzuki 2-Strokes: 74 gt550, 88 Yamaha FZR400, 2019 Kaw Z900RS
- Location: penetang, ontario
Re: excessive smoke right cylinder
This is likely a bad thing to say here, but I am completely frustrated and beginning to hate this bike. 74 Gt750. Complete engine rebuild, 1st oversize pistons and rings, crank rebuild, seals and bearings. New points, and condensors, replaced coils. Cleaned carbs 4 times anyway and maybe more.
It idles but when I take off it does not run on all cylinders. Timing is dead on with dial gauge and meter to tell when the points open. If I gently give it throttle when moving it seems to respond and pull but not under quick acceleration.
I have spent hour upon hour and invested a lot of money with crappy results. Open to any ideas that anyone may have.
Thanks
Dave
It idles but when I take off it does not run on all cylinders. Timing is dead on with dial gauge and meter to tell when the points open. If I gently give it throttle when moving it seems to respond and pull but not under quick acceleration.
I have spent hour upon hour and invested a lot of money with crappy results. Open to any ideas that anyone may have.
Thanks
Dave
-
- On the main road
- Posts: 116
- Joined: Wed Nov 28, 2012 4:48 pm
- Country: canada
- Suzuki 2-Strokes: 74 gt550, 88 Yamaha FZR400, 2019 Kaw Z900RS
- Location: penetang, ontario
Re: excessive smoke right cylinder
i am now seeing that the 74 model was different. The plugs are black very fast meaning a rich mixture. I am using 45 pilot jets and 110 mains. The air screw is out 3/4 turn. Plug is B8ES.
Should I go to a smaller pilot? Or try the B6ES? I would really like to get this bike running correctly.
Thanks
Should I go to a smaller pilot? Or try the B6ES? I would really like to get this bike running correctly.
Thanks
-
- Yeah Man, the Interstate
- Posts: 503
- Joined: Sat Sep 05, 2015 3:14 pm
- Country: us
- Suzuki 2-Strokes: GT
- Location: southeast pa
Re: excessive smoke right cylinder
I never used it, but some screw an adapter in bowl drain plug,then use a clear tube to show where actual fuel level is, not relying on float measurement. If fuel level in bowl is too high can cause rich issue.
I think they call for air screws to be 1/4 turn out on 74.I believe 74 calls for 47.5 pilots so your 45 are already smaller. Mains are left and right 110, center 107.5, not sure it really matters.
I use B8ES plugs in my 74, although I think they do call for B6ES
I think they call for air screws to be 1/4 turn out on 74.I believe 74 calls for 47.5 pilots so your 45 are already smaller. Mains are left and right 110, center 107.5, not sure it really matters.
I use B8ES plugs in my 74, although I think they do call for B6ES
76 GT185
77 GT250
77 GT380
76 GT500
73 GT550
73 GT750
74 GT750
71 T250 scrambler
75 T500 cafe
77 GT250
77 GT380
76 GT500
73 GT550
73 GT750
74 GT750
71 T250 scrambler
75 T500 cafe