Pic of a baffle for T350

General discussion about Street two-stroke Suzuki motorcycles.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
User avatar
Luxmatic
Still in the Driveway
Posts: 9
Joined: Wed Jun 20, 2018 8:34 pm
Country: Canada
Suzuki 2-Strokes: T350 Rebel
Location: Vancouver

Pic of a baffle for T350

Post by Luxmatic »

Hi folks,
Is this the correct baffle for a T350 exhaust?

It was lodged in the pipe, but was lodged inside further than normal. I had to use some long reach needle nose pliers to extract it from the muffler. The other muffler has no baffle at all.

Can anyone show a pic of the correct baffle, or confirm if this one is the correct one? I've tried google, but haven't come up with a definitive answer.

Cheers!
Marc
baffle.jpg
You do not have the required permissions to view the files attached to this post.
- Marc
User avatar
Luxmatic
Still in the Driveway
Posts: 9
Joined: Wed Jun 20, 2018 8:34 pm
Country: Canada
Suzuki 2-Strokes: T350 Rebel
Location: Vancouver

Re: Pic of a baffle for T350

Post by Luxmatic »

Answering my own question - yes this was a T350 baffle, but someone cut it down. I can see where it was shortened when comparing to a stock example.

Today I was also very fortunate to obtain locally one each NOS T350 and T250 baffles (unfortunately he didn't have any pairs). He said that the T250 baffle will work fine inside the T350 muffler (the diameter matches, but it's a slightly different design and slightly longer).

Anyone disagree with this?
T350 baffles.jpg
2 baffles.jpg
You do not have the required permissions to view the files attached to this post.
- Marc
Post Reply