Questions are for the 1972 GT550 cafe build.
The crankcase has the early-style press fit SRIS fittings. Any tip on how to install them?
A pic of how Suzuki originally routed the SRIS lines on the underside of the crankcase would be useful.
SRIS questions for GT550 build
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- jabcb
- Moto GP
- Posts: 4242
- Joined: Mon Dec 13, 2010 4:32 pm
- Country: USA
- Suzuki 2-Strokes: 69 T350 thru 75 GT750
- Location: southwestern Pennsylvania
SRIS questions for GT550 build
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
- FullMoon
- On the street
- Posts: 18
- Joined: Thu Jan 18, 2018 1:21 pm
- Country: United States
- Suzuki 2-Strokes: '74 GT380
- Location: Lincoln, Nebraska
Re: SRIS questions for GT550 build
Here's a pic from my '74 GT380. Not sure if the GT550 is the same or not.
Mitch
https://goo.gl/photos/YnVDs1cjtuAbvtJ86" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
Mitch
https://goo.gl/photos/YnVDs1cjtuAbvtJ86" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
- jabcb
- Moto GP
- Posts: 4242
- Joined: Mon Dec 13, 2010 4:32 pm
- Country: USA
- Suzuki 2-Strokes: 69 T350 thru 75 GT750
- Location: southwestern Pennsylvania
Re: SRIS questions for GT550 build
Thanks. I think the GT550 routing will be a bit different because of the starter motor.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
- jabcb
- Moto GP
- Posts: 4242
- Joined: Mon Dec 13, 2010 4:32 pm
- Country: USA
- Suzuki 2-Strokes: 69 T350 thru 75 GT750
- Location: southwestern Pennsylvania
Re: SRIS questions for GT550 build
Found a GT550 build topic with a useful pic. viewtopic.php?t=5351&start=15
Any tips on how to install the early-style press fit SRIS fittings?
Any tips on how to install the early-style press fit SRIS fittings?
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
-
- Yeah Man, the Interstate
- Posts: 590
- Joined: Tue Mar 10, 2015 12:35 pm
- Country: WALES
- Suzuki 2-Strokes: suzuki gt 550j
- Location: Wales
Re: SRIS questions for GT550 build
Hi
I have a 550 J but it has the screw in SRIS valves and i have no experience of the push fit ones.
However there is a Suzuki bulletin GT18 which has some info and diagrams that may help.
I have a 550 J but it has the screw in SRIS valves and i have no experience of the push fit ones.
However there is a Suzuki bulletin GT18 which has some info and diagrams that may help.
98 carb Blackbird and GT550j
-
- AMA Superbike
- Posts: 1769
- Joined: Tue Oct 14, 2008 6:47 pm
- Location: Blythewood, SC, USA
Re: SRIS questions for GT550 build
SRIS was an unnecessary experiment which really didn't do very much. I take them out.
If you stroke it more than twice; you're playing with it.
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
- jabcb
- Moto GP
- Posts: 4242
- Joined: Mon Dec 13, 2010 4:32 pm
- Country: USA
- Suzuki 2-Strokes: 69 T350 thru 75 GT750
- Location: southwestern Pennsylvania
Re: SRIS questions for GT550 build
Later GT380s didn’t have SRIS. Suzuki used bolts + washers to replace the crankcase SRIS fittings. So I got rid of the SRIS on the GT380 cafe build.
But my early GT550 has press-fit SRIS fittings so I can’t use the bolts. So I’m going to keep SRIS.
Perhaps a plus for SRIS might be that if the oiling is a little uneven with a cylinder not getting as much as the other, the SRIS might act to even it out a bit.
My current thought is that I should put the SRIS fittings in the freeze for a while.
Might also be advisable to put them in first in case I break one & have to replace it.
But my early GT550 has press-fit SRIS fittings so I can’t use the bolts. So I’m going to keep SRIS.
Perhaps a plus for SRIS might be that if the oiling is a little uneven with a cylinder not getting as much as the other, the SRIS might act to even it out a bit.
My current thought is that I should put the SRIS fittings in the freeze for a while.
Might also be advisable to put them in first in case I break one & have to replace it.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
- tz375
- Moto GP
- Posts: 6204
- Joined: Mon Nov 03, 2008 10:47 am
- Location: Illinois
Re: SRIS questions for GT550 build
I seem to recall that they are a taper fit, so it should be possible to clean teh hole, smear on a little loctite and ring them in - or give them a light tap.
On the only 72 GT550 I have worked on, we drilled and tapped the holes and plugged them - the same way we plug GT750 SRIS holes. If you go that way, don't forget to plug the barrels too..
On the only 72 GT550 I have worked on, we drilled and tapped the holes and plugged them - the same way we plug GT750 SRIS holes. If you go that way, don't forget to plug the barrels too..
-
- AMA Superbike
- Posts: 1769
- Joined: Tue Oct 14, 2008 6:47 pm
- Location: Blythewood, SC, USA
Re: SRIS questions for GT550 build
The ones on my cylinders were press-fit. A tap and set screw with lock-tite fixed that.....
If you stroke it more than twice; you're playing with it.
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
Too many bikes, too much time, ENOUGH SPACE, FINALLY! Never enough money.........
- jabcb
- Moto GP
- Posts: 4242
- Joined: Mon Dec 13, 2010 4:32 pm
- Country: USA
- Suzuki 2-Strokes: 69 T350 thru 75 GT750
- Location: southwestern Pennsylvania
Re: SRIS questions for GT550 build
How time flies, or more accurately how slow we work on our builds. A year ago I asked about the SRIS and am now ready to install the lines.
Any suggestions on how to install the little clips that secure the SRIS lines?
Any suggestions on how to install the little clips that secure the SRIS lines?
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE