My 63' Yamaha YG1 needed a new seat so I'm going to build a cafe seat for it. I also replaced the riser bars with some flat bars.Got a free B100p
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
Vova
- On the street
- Posts: 39
- Joined: Sun Sep 30, 2012 8:46 pm
- Country: USA
- Suzuki 2-Strokes: B100P
Re: Got a free B100p
Not the Suzuki but it's close My 63' Yamaha YG1 needed a new seat so I'm going to build a cafe seat for it. I also replaced the riser bars with some flat bars.
My 63' Yamaha YG1 needed a new seat so I'm going to build a cafe seat for it. I also replaced the riser bars with some flat bars.You do not have the required permissions to view the files attached to this post.
-
Vova
- On the street
- Posts: 39
- Joined: Sun Sep 30, 2012 8:46 pm
- Country: USA
- Suzuki 2-Strokes: B100P
Re: Got a free B100p
I cut off the back of the pan and flattened the pan to sit on top of the frame. Next i cut down both curved sides of the pan to make it straight. Then took some some floral foam and made a rear section of the seat. It's not attached to the pan yet as i need to fiberglass it first.
You do not have the required permissions to view the files attached to this post.
-
Suzukidave
- Moto GP
- Posts: 3980
- Joined: Fri Oct 24, 2008 5:55 pm
- Country: US
- Suzuki 2-Strokes: GT750 x2 97 -1200 Bandit 86 GSXR1100
- Location: Lancaster Pa.
Re: Got a free B100p
Did you get a chance to finish your custom seat 
the older i get the faster i was
-
Vova
- On the street
- Posts: 39
- Joined: Sun Sep 30, 2012 8:46 pm
- Country: USA
- Suzuki 2-Strokes: B100P
Re: Got a free B100p
Not yet. Added a back support and welded the main pan. I'm trying to make the back section out of metal instead of fiberglass. Going to work on it tomorrow. Stay tuned...Suzukidave wrote:Did you get a chance to finish your custom seat
