Page 1 of 1

T350 exhaust baffle packing?

Posted: Sat Jan 25, 2014 4:29 pm
by mike1161
Did a search, but couldn't find anything conclusive. For the stock T350 pipes, does the baffle have any fiberglass packing around it? I'm thinking of going back to the stock exhausts, and when I removed the baffle, it fits pretty tight in through the circular plates that are inside the exhaust. I don't see how any glass packing could be wrapped around these baffles. Or do they just do their silencing by how the exhaust gases are routed through the holes and passages in the baffle and the inner plates?
Thanks

Re: T350 exhaust baffle packing?

Posted: Sun Jan 26, 2014 2:51 pm
by Coyote
There was a discussion about this very same subject a few months ago. It was determined that the T350 did not use any packing.

Re: T350 exhaust baffle packing?

Posted: Tue Jan 28, 2014 6:50 am
by mike1161
OK, thanks for the reply. That makes sense, seems like the silencing is done by how the gases are routed back and forth through the inner passages. Also kind of nice that there's no glass to burn out or repack.