GT380 Crankcase cover screws
Posted: Tue Aug 28, 2012 10:06 am
I don't know if this has been posted before, but while looking through my GT380 info I came across the following list of crankcase cover screws that I thought may be useful to anyone wanting just the odd screw rather than a full set.
Clutch Cover (6mm Phillips)
3 x 20mm
4 x 35mm
2 x 80mm
Generator Cover (6mm Phillips)
4 x 30mm
Sprocket Cover (6mm Phillips)
2 x 45mm
3 x 85mm
Sprocket Outer Cover (5mm Phillips)
1 x 16mm
2 x 35mm
Points Cover (5mm Phillips)
3 x 50mm
Oil Pump Cover (5mm Phillips)
1 x 16mm
2 x 35mm
Clutch Cover (6mm Phillips)
3 x 20mm
4 x 35mm
2 x 80mm
Generator Cover (6mm Phillips)
4 x 30mm
Sprocket Cover (6mm Phillips)
2 x 45mm
3 x 85mm
Sprocket Outer Cover (5mm Phillips)
1 x 16mm
2 x 35mm
Points Cover (5mm Phillips)
3 x 50mm
Oil Pump Cover (5mm Phillips)
1 x 16mm
2 x 35mm