VJ23 FRONT BRAKE MASTER CYLINDER REBUILD KIT
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- Still in the Driveway
- Posts: 2
- Joined: Thu Apr 07, 2011 12:12 am
- Country: USA
- Suzuki 2-Strokes: 1996 RGV 250R VJ23 LS, 1973 GT 750
VJ23 FRONT BRAKE MASTER CYLINDER REBUILD KIT
Just discovered that the front brake master cylinder on my '96 RGV VJ23 needs new seals and piston. I know there is a rebuild kit available, but my local parts guys are having a hard time cross-referencing the correct kit part #. I know that the master shares its internals with a host of other bikes. It's a Nissin, which was used on most sportbikes of a similar size during that specific era. All my NSRs and TZRs use an almost identical unit, differing only in a couple of exterior specs for reservoir mounting, etc. I believe that they are 14mm bores. Any help in finding a US part # or a cross-reference # would be greatly appreciated. I don't want to spend $60+ for an overseas purchase for a kit that should cost less than $20. Thanks