HELP! T20 OH NO!!

doug rooney · Post by **doug rooney** » Tue Jul 28, 2009 6:48 am

Just had my cylinders bored to 1mm over and now notice this morning there is a bad crack acroos the cylinder skirt! Is it feasible to repair? If not, how bout buying one new STANDARD size and using the good one that's bored 1mm over? If none of the above, where to look for new cylinders?
DANGIT!!!!!!!!!!!!!!!!!!!

http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT

Should I take a chance with these people?

elbert · Post by **elbert** » Tue Jul 28, 2009 11:45 am

I bought the cyllinders I have on my T350 from that seller, had no problems and the cylinders were in excellent condition, be aware that you'll need to get the cyllinders honed when they are NOS.

doug rooney · Post by **doug rooney** » Tue Jul 28, 2009 12:34 pm

Thanks Elbert. Were they advertised as genuine Suzuki nos and is that what you got? Also, how long did it take if you recall?

doug rooney · Post by **doug rooney** » Tue Jul 28, 2009 4:23 pm

Elbert: Talk to me. Need to know how it went with those guys. Ad says they only have one pair and want to buy if it's all good. Thanks, Doug

strainer · Post by **strainer** » Tue Jul 28, 2009 6:42 pm

delete

doug rooney · Post by **doug rooney** » Tue Jul 28, 2009 7:49 pm

Thanks Fred. That helps alot.

elbert · Post by **elbert** » Wed Jul 29, 2009 1:08 am

They were advertised as NOS and they were. There was a little dust and dirt on them butt nothing to worrie about, shipment was fairly quick and everything went smothly. I would not be worried to deal with them again.

doug rooney · Post by **doug rooney** » Wed Jul 29, 2009 7:32 am

Thanks. Just bought the ebay ones