T20 Float bowl gaskets for Mikuni VM 24 SH
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- Still in the Driveway
- Posts: 5
- Joined: Sun Jan 23, 2022 3:40 pm
- Country: USA
- Suzuki 2-Strokes: 1967 X-6 Hustler
T20 Float bowl gaskets for Mikuni VM 24 SH
New member here. Bike is1967 T20. I can't find gaskets for these carbs anywhere. The Suzuki parts supply houses in the US I have tried only stock parts for 1973 and newer. Does anyone know of a compatible gasket for these carburetors? Thanks in advance.
- Alan H
- Moto GP
- Posts: 3172
- Joined: Thu Feb 16, 2012 11:50 am
- Country: England
- Suzuki 2-Strokes: 4 x GT550s - J, M, A, B.
- Location: The Republic of South Yorkshire
Re: T20 Float bowl gaskets for Mikuni VM 24 SH
Always nice to do a quick intro as a first post, just basics like which general area you live, who you are and a bit of your biking experience.
There's a better chance of getting a reply then!
Of course, you could always make some gaskets......
Otherwise, welcome to the forum.
There's a better chance of getting a reply then!
Of course, you could always make some gaskets......
Otherwise, welcome to the forum.
Think of how stupid the average person is, then realise that half of them are more stupid than that.
- jabcb
- Moto GP
- Posts: 4241
- Joined: Mon Dec 13, 2010 4:32 pm
- Country: USA
- Suzuki 2-Strokes: 69 T350 thru 75 GT750
- Location: southwestern Pennsylvania
Re: T20 Float bowl gaskets for Mikuni VM 24 SH
Welcome to the forum.
Service manual, owner’s manual & 69 T20 parts manual are here: https://www.oldjapanesebikes.com/mraxl_ ... /index.php
You may find it useful to get a parts manual for your 67. Suzuki service manuals from back then are pretty lame. A Clymer or Haynes manual might also be useful.
They're available via eBay: https://www.ebay.com/sch/i.html?_from=R ... &_osacat=0
Partzilla lists the 69 T20: https://www.partzilla.com/catalog/suzuk ... e/1969/t20
Your local Suzuki dealer might also be useful.
Service manual, owner’s manual & 69 T20 parts manual are here: https://www.oldjapanesebikes.com/mraxl_ ... /index.php
You may find it useful to get a parts manual for your 67. Suzuki service manuals from back then are pretty lame. A Clymer or Haynes manual might also be useful.
They're available via eBay: https://www.ebay.com/sch/i.html?_from=R ... &_osacat=0
Partzilla lists the 69 T20: https://www.partzilla.com/catalog/suzuk ... e/1969/t20
Your local Suzuki dealer might also be useful.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
-
- Still in the Driveway
- Posts: 5
- Joined: Sun Jan 23, 2022 3:40 pm
- Country: USA
- Suzuki 2-Strokes: 1967 X-6 Hustler
Re: T20 Float bowl gaskets for Mikuni VM 24 SH
Fair enough. Jody Schaaf; Savannah, GA; age 66. The first "real" motorcycle I rode was my best friend's 1975 Kawasaki 400 triple, which got me hooked. I then sold my 1973 Toyota Corolla while I was at UGA to buy a brand new 1976 Yamaha RD-400 (Green) off the showroom floor in Savannah. It was a great bike. I've been riding off and on since then...quite a bit of mountain riding and many runs at the Gap. Had a 1986 Suzuki GS550 ES, a custom 1999 Kawasaki ZRX-1100, and currently a 1992 black Honda VFR750, 1984 RZ-350 (in progress), and 1967 T20, in need of carb gaskets! I will be at the next 2 stroke rally at the gap, hopefully with the T20 and the RZ. I met Evans Ward at last years 2 stroke rally. He's a great guy and mentor, and turned me onto this site.
-
- Still in the Driveway
- Posts: 5
- Joined: Sun Jan 23, 2022 3:40 pm
- Country: USA
- Suzuki 2-Strokes: 1967 X-6 Hustler
Re: T20 Float bowl gaskets for Mikuni VM 24 SH
Thanks Jabcd. I found the part #. Searched on it and found the correct gasket (hopefully) at Partzilla.
- Alan H
- Moto GP
- Posts: 3172
- Joined: Thu Feb 16, 2012 11:50 am
- Country: England
- Suzuki 2-Strokes: 4 x GT550s - J, M, A, B.
- Location: The Republic of South Yorkshire
Re: T20 Float bowl gaskets for Mikuni VM 24 SH
Manuals & 'stuff' here - https://www.oldjapanesebikes.com/
Think of how stupid the average person is, then realise that half of them are more stupid than that.
-
- Still in the Driveway
- Posts: 5
- Joined: Sun Jan 23, 2022 3:40 pm
- Country: USA
- Suzuki 2-Strokes: 1967 X-6 Hustler
Re: T20 Float bowl gaskets for Mikuni VM 24 SH
Thanks Alan.
- Evans Ward
- To the on ramp
- Posts: 326
- Joined: Mon Oct 24, 2016 12:35 pm
- Country: USA
- Suzuki 2-Strokes: 76 GT750, 72 H2 750, 84 RZ350
- Location: Macon, GA. USA
Re: T20 Float bowl gaskets for Mikuni VM 24 SH
Welcome Jody! Glad you finally got in. Jody is good people gang and is very enthusiastic about motorcycling like the rest of us. He’s a little over 3 hours from me; but in my book, that’s semi- local. Hope you are able to find those needed float bowl gaskets.
1976 Suzuki GT750 (Maui Blue), 1972 Kawasaki H2 750 Mach IV (Candytone Blue), 1984 Yamaha RZ350 (KRR- Yellow/ Black).
-
- Still in the Driveway
- Posts: 5
- Joined: Sun Jan 23, 2022 3:40 pm
- Country: USA
- Suzuki 2-Strokes: 1967 X-6 Hustler
Re: T20 Float bowl gaskets for Mikuni VM 24 SH
Received 4 of them this week. Hope they fit. Thanks for the good word Evans.