Parts source wanted
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- Willie
- Around the block
- Posts: 73
- Joined: Mon Sep 28, 2009 8:06 am
- Country: USA
- Suzuki 2-Strokes: GT750, GS1100E, GS1100G
- Location: Kingsport, TN
Parts source wanted
Rather than look parts up and compare prices I thought I'd start a thread on here and ask where other members are buying parts for their vintage Suzukis.
I've been everywhere from Bangor all the way to mighty Maine!
-
- Yeah Man, the Interstate
- Posts: 630
- Joined: Fri Aug 11, 2017 7:09 am
- Country: england
- Suzuki 2-Strokes: several gt250 ramairs
Re: Parts source wanted
bit late for that, willie
if you look in the suzuki 2 strokes - street section at the top of the main page, the first/second thread is where people are getting their bits from. the first post is substitute items for parts no longer available and the second thread is suzuki 2 stroke resources. should find plenty of advice in those 2 threads
cheers, dd.
if you look in the suzuki 2 strokes - street section at the top of the main page, the first/second thread is where people are getting their bits from. the first post is substitute items for parts no longer available and the second thread is suzuki 2 stroke resources. should find plenty of advice in those 2 threads
cheers, dd.
GTS250 road registered. TS250 engine, Ramair frame.
GT250 big bang road registered. Both pistons fire the same time. USD forks.
GT285 road registered. Overbored - 58mm and TS125 +2 pistons fitted.
GT10 road registered. '65 T10 engine, GT250 frame.
GT250 big bang road registered. Both pistons fire the same time. USD forks.
GT285 road registered. Overbored - 58mm and TS125 +2 pistons fitted.
GT10 road registered. '65 T10 engine, GT250 frame.
- Willie
- Around the block
- Posts: 73
- Joined: Mon Sep 28, 2009 8:06 am
- Country: USA
- Suzuki 2-Strokes: GT750, GS1100E, GS1100G
- Location: Kingsport, TN
Re: Parts source wanted
I appreciate the response, dd, but was looking for a stateside source and links that are current. For anyone else in a similar situation, I found part availability and prices lower than the rest at CheapBikeParts.com. I ordered 1st over piston rings and 2 of the phenolic rings that go on the damper rods after starting this thread last night.
I've been everywhere from Bangor all the way to mighty Maine!
- ConnerVT
- Novice racer
- Posts: 963
- Joined: Wed Jan 18, 2012 8:01 pm
- Country: USA
- Suzuki 2-Strokes: T500R (now), T500M (40 yrs ago)
- Location: North of Albany, NY
Re: Parts source wanted
Click here to Buy Cheapbikeparts.com as your website name or call 1-561-898-0724
- Willie
- Around the block
- Posts: 73
- Joined: Mon Sep 28, 2009 8:06 am
- Country: USA
- Suzuki 2-Strokes: GT750, GS1100E, GS1100G
- Location: Kingsport, TN
Re: Parts source wanted
Sorry about that. I meant
https://www.cheapcycleparts.com
https://www.cheapcycleparts.com
I've been everywhere from Bangor all the way to mighty Maine!