GT550A top end woes
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- slosher
- On the street
- Posts: 18
- Joined: Wed Nov 24, 2021 12:28 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT750L & GT550L T140V & TL1000 97s
- Location: Walsall UK
Re: GT550A top end woes
He's not making them they came off a black GT550 he did a restoration on i think it was his first 550 jobby after doing loads of Kettles.
And Alan has more holidays than Father Xmas
And Alan has more holidays than Father Xmas
-
- To the on ramp
- Posts: 346
- Joined: Sun Mar 07, 2021 2:32 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT550A 1976
Re: GT550A top end woes
Thats a shame on pipes.i keep searching.one got be out there somewhere? Alan needs lots of hols .he got lots of 550?s to look after and that would wear any of us out
-
- To the on ramp
- Posts: 346
- Joined: Sun Mar 07, 2021 2:32 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT550A 1976
Re: GT550A top end woes
I be out for a run to the Bells Sunday despite cold.550 loves cold air.not salting roads round here so provided its dry i be out.VFR should be back on road nxt week.
- Alan H
- Moto GP
- Posts: 3182
- Joined: Thu Feb 16, 2012 11:50 am
- Country: England
- Suzuki 2-Strokes: 4 x GT550s - J, M, A, B.
- Location: The Republic of South Yorkshire
Re: GT550A top end woes
And more to come. I've bin retired 6 years this month, so I've done my bit for [s]prostitute[/s] posterity.
Last edited by Alan H on Sun Nov 28, 2021 2:07 am, edited 2 times in total.
Think of how stupid the average person is, then realise that half of them are more stupid than that.
- Alan H
- Moto GP
- Posts: 3182
- Joined: Thu Feb 16, 2012 11:50 am
- Country: England
- Suzuki 2-Strokes: 4 x GT550s - J, M, A, B.
- Location: The Republic of South Yorkshire
Re: GT550A top end woes
That's in the evening. It's warmer during the day but don't worry, we're struggling through....
Think of how stupid the average person is, then realise that half of them are more stupid than that.
-
- To the on ramp
- Posts: 346
- Joined: Sun Mar 07, 2021 2:32 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT550A 1976
Re: GT550A top end woes
Must be hell.thank you Alan for all your suffering!
-
- To the on ramp
- Posts: 346
- Joined: Sun Mar 07, 2021 2:32 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT550A 1976
Re: GT550A top end woes
Eve all,i see Higgs is doing 3 into 1 for all kettles and retains centre std.hoping he will do 550/380 ones soon.
- slosher
- On the street
- Posts: 18
- Joined: Wed Nov 24, 2021 12:28 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT750L & GT550L T140V & TL1000 97s
- Location: Walsall UK
Re: GT550A top end woes
A mate sent me a link with Higgs test riding a Kettle near his unit they do sound very nice indeed
Anybody know the price of the 3 into 1 and are they S/Steel
- jabcb
- Moto GP
- Posts: 4251
- Joined: Mon Dec 13, 2010 4:32 pm
- Country: USA
- Suzuki 2-Strokes: 69 T350 thru 75 GT750
- Location: southwestern Pennsylvania
Re: GT550A top end woes
They look good & are reasonably priced.
Price & a pic are on the Higgspeed website: https://higgspeed.com/product/expansion ... i-gt750jk/
Curious how the performance compares to the Jemcos on my GT750.
Price & a pic are on the Higgspeed website: https://higgspeed.com/product/expansion ... i-gt750jk/
Curious how the performance compares to the Jemcos on my GT750.
BAS (Bike Acquisition Syndrome) - too many bikes but have room for more
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
Suzuki:
GT750 2x75
GT550 72 & 75
GT380 72
T500 69 project & 73 project
T350 69 & 71
Honda 85 CB650SC & 86 CB700SC
09 Triumph Bonneville SE
-
- To the on ramp
- Posts: 346
- Joined: Sun Mar 07, 2021 2:32 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT550A 1976
Re: GT550A top end woes
I dont know for sure but guessing performance of Higgs 3 into 1 be similar to a Piper 3 into 1 .on my kettle it was def quicker mid range but ran out of steam but not lovely sounds by approx 110 mph .with 3 seperate expansions it will have a higher top end .same performance restriction with the 380/550 when fitted with a Piper 3 into 1 compared to seperate expansions.i only want to a 3 into 1 or Higgs expansions to save my good std pipes.my kettle was Stan Stephens stage 3 tuned so may have had a better top end than a std kettle with a Piper
- slosher
- On the street
- Posts: 18
- Joined: Wed Nov 24, 2021 12:28 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT750L & GT550L T140V & TL1000 97s
- Location: Walsall UK
Re: GT550A top end woes
Looks like you can retain the main stand too which is a great plus for when oil changing etc
that's one thing i do miss with the piper on the 550
that's one thing i do miss with the piper on the 550
-
- To the on ramp
- Posts: 346
- Joined: Sun Mar 07, 2021 2:32 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT550A 1976
Re: GT550A top end woes
Yes i noticed that too.the large bulge at bottom of a Piper is not there.looks like a great design.i really hope Higgs extends range to include 550/380.although price is almost the same as 3 seperate pipes .thought it would be a bit cheaper.
-
- To the on ramp
- Posts: 346
- Joined: Sun Mar 07, 2021 2:32 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT550A 1976
Re: GT550A top end woes
I give Higgs a ring this week to see if there are any plans for the smaller triples.im sure he would sell plenty.i let you all know
-
- To the on ramp
- Posts: 346
- Joined: Sun Mar 07, 2021 2:32 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT550A 1976
Re: GT550A top end woes
Afternoon Slosher on a horrible ,cold ,wet n windy no biking day! I saw your ad for the 3 into 1 Piper.i take it ling gone ? Do you know of any others?
- slosher
- On the street
- Posts: 18
- Joined: Wed Nov 24, 2021 12:28 pm
- Country: United Kingdom
- Suzuki 2-Strokes: GT750L & GT550L T140V & TL1000 97s
- Location: Walsall UK
Re: GT550A top end woes
Hello VM long gone i'm afraid my friend sold it about 2yrs ago I managed to pick up a front and middle 550 piper but with a S/Steel 750 back can which is up at an angle it looks ok currently having to use this one as the top upper orig pipe is blocked
If i hear of one going i'll let you know