tachometer drive GT380

[sparky]

Hi Guys
My rev counter has stopped working, i have checked the cable which is in good condition, after reading the manual it says the tacho meter and oil pump runs from the same shaft, so i have checked and the oil pumps is working but looking down from top of the tacho drive sleeve there is no movement. I removed the small bolt near the sleeve, can i just pull the sleeve up and remove the vertical drive shaft. Im asking this because i have soak the sleeve in wd40 and it does not want to come out.
Regards

[karl pa]

I would think the o ring is holding it in place.

[jabcb]

eBay can be useful for seeing what the parts actually look like.
See: https://www.ebay.com/itm/Suzuki-380-GT- ... 2320949911

[sparky]

Oh dear, its been sitting in penetrating oil for 3 days now, still no movement.