Good Afternoon
I don't have a service manual yet and was wondering how to get the axle out of front wheel on GT750 ? I have the wheel off but the axle seems like something is holding it in place snugly. I don't want to hit on the threaded end as I'm not sure I will break something.
Thanks for help,
Marvin
front axle GT750
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
Marvin
- Still in the Driveway
- Posts: 6
- Joined: Mon Aug 24, 2020 4:00 pm
- Country: Canada
- Suzuki 2-Strokes: 1977 GT750
-
karl pa
- Yeah Man, the Interstate
- Posts: 503
- Joined: Sat Sep 05, 2015 3:14 pm
- Country: us
- Suzuki 2-Strokes: GT
- Location: southeast pa
Re: front axle GT750
Welcome
The wheels, front and rear, have a spacer between the wheel bearings, over time the axle can get stuck from corrosion, you may need to hit it to get out. I put a thin coat of grease on the axle when reinstalling.
The wheels, front and rear, have a spacer between the wheel bearings, over time the axle can get stuck from corrosion, you may need to hit it to get out. I put a thin coat of grease on the axle when reinstalling.
76 GT185
77 GT250
77 GT380
76 GT500
73 GT550
73 GT750
74 GT750
71 T250 scrambler
75 T500 cafe
77 GT250
77 GT380
76 GT500
73 GT550
73 GT750
74 GT750
71 T250 scrambler
75 T500 cafe
-
Marvin
- Still in the Driveway
- Posts: 6
- Joined: Mon Aug 24, 2020 4:00 pm
- Country: Canada
- Suzuki 2-Strokes: 1977 GT750
Re: front axle GT750
I gave it a whack with a piece of hard 2 x 4 and then I was able to get it out.
Thanks for the help.
Best Regards
Thanks for the help.
Best Regards
