Suzuki 2 Strokes

Anyone ever remove one and SUCCESSFULLY get it back in?
Looks like it shouldn't be too difficult.

They are a tapered end interference fit. If you use a socket and rock it back and forwards but dont press forward it will come out.

I've already removed it, was concerned about getting it back in...….

Pop it in the fridge and it will tap in easily. I made a little pusher that goes over the spigot to protect it. Just a bit of steel with a hole drilled in. The spigot goes in the hole and you tap t'other end. I also put a thin O ring on the part that goes in the cases, and a smear of loctite to hold it in position.
http://www.kettleclinic.co.uk/kcforum/v ... &start=120" onclick="window.open(this.href);return false; towards the bottom of the next last page.