Hi again
I have the cylinders on. Not an easy job BTW. I am missing the stud in front of the thermostat housing. 09108-08035 . It is not available and I did not see one on ebay.
Can some one give me the size or does someone have an extra one? Or, can I just use another of the smaller head bolts instead?
Thanks
Dave
cylinder head stud
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
kawonda750
- On the main road
- Posts: 115
- Joined: Wed Nov 28, 2012 4:48 pm
- Country: canada
- Suzuki 2-Strokes: 74 gt550, 88 Yamaha FZR400, 2019 Kaw Z900RS
- Location: penetang, ontario
-
alanr
- To the on ramp
- Posts: 260
- Joined: Sat Jan 29, 2011 10:51 pm
- Location: New Zealand
Re: cylinder head stud
if you google the part number it will lead you to Partzilla,it will say LeMans GT750 cylinder diagram.item 5 will give your part number and underneath the updated part number.google this number 01421 0845A which leads to where you can purchase,the 0845 is the size (8mm dia-45 length).
CB360T
TT250
TT250
-
kawonda750
- On the main road
- Posts: 115
- Joined: Wed Nov 28, 2012 4:48 pm
- Country: canada
- Suzuki 2-Strokes: 74 gt550, 88 Yamaha FZR400, 2019 Kaw Z900RS
- Location: penetang, ontario
Re: cylinder head stud
Thank you alan. I always use partzilla but it did not show a superceded number.
