T20 crank disassembly method
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
-
- Still in the Driveway
- Posts: 1
- Joined: Wed Jan 18, 2017 2:23 pm
- Country: USA
- Suzuki 2-Strokes: GS1000 TC250
- Location: N. Alabama
T20 crank disassembly method
Fixing to have my center seals/bearing replaced at a local machine shop. Hoping to only remove one side to get to the center. Any suggestions would be helpful since this is not their normal task. Other than plenty of pre measurements and scriped marks is where we are now.