T20 crank disassembly method

Need some help? Put your question up here. Many years of experience on the board to help you get up and running.

Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan

Post Reply
snakeyes
Still in the Driveway
Posts: 1
Joined: Wed Jan 18, 2017 2:23 pm
Country: USA
Suzuki 2-Strokes: GS1000 TC250
Location: N. Alabama

T20 crank disassembly method

Post by snakeyes »

Fixing to have my center seals/bearing replaced at a local machine shop. Hoping to only remove one side to get to the center. Any suggestions would be helpful since this is not their normal task. Other than plenty of pre measurements and scriped marks is where we are now.
Post Reply