Suzuki2Strokes.com

Sundial Moto Sports

Suzuki Two-Stroke Message Board
Suzuki2Strokes.com
It is currently Thu Jan 23, 2020 7:26 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: cylinder head removal
PostPosted: Sun Nov 24, 2019 12:49 pm 
Offline
On the street

Joined: Wed Nov 28, 2012 4:48 pm
Posts: 23
Location: penetang, ontario
Country: canada
Bikes owned: gt750, 70 Kaw H1, 72 Kaw H2
Hi. I am in Ontario Canada and working on my 3rd GT750. This is my latest winter project to keep me busy when I retire in a couple weeks. I have all the head bolts out but the head will not budge. Is there a hidden bolt or one from underneath ? This is a 76 GT750 A that has been sitting for quite a long while but in very nice original shape. I have tried the rubber hammer and even prying it with no decent result. Thanks

Dave


Top
 Profile  
 
PostPosted: Sun Nov 24, 2019 8:24 pm 
Offline
On the street

Joined: Tue Aug 22, 2017 5:29 pm
Posts: 27
Country: Canada
Bikes owned: Original owner GT550L
No hidden bolts!
Cliff in Whitby!


Attachments:
20191124_203601-1024x768.jpg
20191124_203601-1024x768.jpg [ 192.58 KiB | Viewed 493 times ]
Top
 Profile  
 
PostPosted: Sun Nov 24, 2019 8:29 pm 
Offline
On the street

Joined: Tue Aug 22, 2017 5:29 pm
Posts: 27
Country: Canada
Bikes owned: Original owner GT550L
Nothing hidden on the underside!


Attachments:
20191124_203542-1036x777.jpg
20191124_203542-1036x777.jpg [ 185.21 KiB | Viewed 493 times ]
Top
 Profile  
 
PostPosted: Mon Nov 25, 2019 5:36 am 
Offline
On the street

Joined: Wed Nov 28, 2012 4:48 pm
Posts: 23
Location: penetang, ontario
Country: canada
Bikes owned: gt750, 70 Kaw H1, 72 Kaw H2
Thanks for the pics. It seems that the stud in the centre 3 vertical rows from the left is too big. I assume it was put in after. It is too big and the head will not slide over it. I think that I will have to drill it out.


Top
 Profile  
 
PostPosted: Mon Nov 25, 2019 5:39 pm 
Offline
On the street

Joined: Tue Aug 22, 2017 5:29 pm
Posts: 27
Country: Canada
Bikes owned: Original owner GT550L
10 mm studs shouldn't be through the head!


Top
 Profile  
 
PostPosted: Mon Nov 25, 2019 6:04 pm 
Offline
On the street

Joined: Tue Aug 22, 2017 5:29 pm
Posts: 27
Country: Canada
Bikes owned: Original owner GT550L
Studs are 4 inches long.


Attachments:
20191125_185506-1036x777.jpg
20191125_185506-1036x777.jpg [ 218.15 KiB | Viewed 456 times ]
Top
 Profile  
 
PostPosted: Mon Nov 25, 2019 6:15 pm 
Offline
On the street

Joined: Tue Aug 22, 2017 5:29 pm
Posts: 27
Country: Canada
Bikes owned: Original owner GT550L
Block is 5 inches high.


Attachments:
20191125_185955-1036x777.jpg
20191125_185955-1036x777.jpg [ 161.73 KiB | Viewed 455 times ]
Top
 Profile  
 
PostPosted: Thu Nov 28, 2019 11:53 am 
Offline
On the street

Joined: Wed Nov 28, 2012 4:48 pm
Posts: 23
Location: penetang, ontario
Country: canada
Bikes owned: gt750, 70 Kaw H1, 72 Kaw H2
If you look at the pic of the head sent by Cliff, the small hole to the left of the plug hole on the right had a nut on a stud. This will not go through the hole as I try to lift off the head. I am able to move the head slightly back and forth and the stud actually turns with it..


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Sundial Moto Sports forum © by Eric F. Kalamaja
Suzuki2Strokes.com