oil seals
Moderators: oldjapanesebikes, H2RICK, diamondj, Suzsmokeyallan
- ConnerVT
- Novice racer
- Posts: 963
- Joined: Wed Jan 18, 2012 8:01 pm
- Country: USA
- Suzuki 2-Strokes: T500R (now), T500M (40 yrs ago)
- Location: North of Albany, NY
Re: oil seals
All should still be available from Suzuki. Not sure on your side of the planet.
- stevebee
- On the main road
- Posts: 108
- Joined: Wed Feb 13, 2013 2:04 am
- Country: australia
- Suzuki 2-Strokes: t500 kawasaki z900 harley davidson flsti
- Location: nsw
Re: oil seals
thanks
- PippiFyrecracker
- Around the block
- Posts: 66
- Joined: Mon Apr 06, 2015 6:17 pm
- Country: Canada
- Suzuki 2-Strokes: 1975 T500, 1983 SP250
- Location: ottawa, ontario, canada
Re: oil seals
I ordered the engine oil seal kit from ebay, pretty sure it came with everything.... I also found out after wards that a local bearing and seal company probably could have sold me seals for suuuper cheap
-
- To the on ramp
- Posts: 337
- Joined: Fri Jun 19, 2015 5:14 am
- Country: USA
- Suzuki 2-Strokes: T500, S32-2, GT185
Re: oil seals
I ordered all those for my bike from bikebandit
- oldjapanesebikes
- Moto GP
- Posts: 3229
- Joined: Sat Feb 07, 2009 12:43 am
- Country: Canada
- Suzuki 2-Strokes: GT750(Jx3,L,M,A,B),T500
- Location: Ontario
- Contact:
Re: oil seals
As already mentioned - always check with your local dealer first - it is sometimes surprising what can still be ordered. And if that doesn't work, then check with a bearing and seal specialist supplier as you can usually match them up. If both those fail - then check first with Reiner in Germany or Marcel in NL, and then check eBay. 

Ian
If at first you don't succeed, just get a bigger hammer !
If at first you don't succeed, just get a bigger hammer !
- PippiFyrecracker
- Around the block
- Posts: 66
- Joined: Mon Apr 06, 2015 6:17 pm
- Country: Canada
- Suzuki 2-Strokes: 1975 T500, 1983 SP250
- Location: ottawa, ontario, canada
Re: oil seals
correction...so it was a hydraulics company that carried various seal, and also an update on the kit bought from ebay, I used the outer crank seals already and they were goodPippiFyrecracker wrote:I ordered the engine oil seal kit from ebay, pretty sure it came with everything.... I also found out after wards that a local bearing and seal company probably could have sold me seals for suuuper cheap
-
- To the on ramp
- Posts: 337
- Joined: Fri Jun 19, 2015 5:14 am
- Country: USA
- Suzuki 2-Strokes: T500, S32-2, GT185
Re: oil seals
ordered all mine from bikebandit as well. 10% discount if you are an AMA member on everything at bikebandit. (although I now see that you are in Australia so I doubt you are an AMA member).
-
- To the on ramp
- Posts: 221
- Joined: Thu Oct 16, 2008 6:59 pm
- Country: Australia
- Suzuki 2-Strokes: Suzuki t500 69,71,73, Gt500 76
- Location: Canberra
Re: oil seals
You should be able to get them from Suzi Parts Australia in Adelaide. email: sales@suziparts.com.au The blokes name is Ray.
If your not successful there send me a PM , I still have quite a few new ones in the shed.
Bob
If your not successful there send me a PM , I still have quite a few new ones in the shed.
Bob
1969 T500
1973 T500
1971 T500 (being restored)
1976 GT500 (being restored)
2012 Ninja 650
1973 T500
1971 T500 (being restored)
1976 GT500 (being restored)
2012 Ninja 650